Complete brushed stainless steel cleanroom door with welded frame

クリーンルームのドア、窓およびインターロックシステム

ステンレス鋼クリーンルームのドア

A welded stainless steel doorset with a 50 mm insulated leaf, brushed non-porous faces and minimal visible fixings for chemically cleaned or washdown-controlled interiors.

304または316Lステンレス鋼
Brushed Hygienic Finish
Welded Wrap-Around Frame
Heavy-Duty Cleanroom Hardware

見積もりリクエスト製品案内

商品紹介

The Stainless Steel Cleanroom Door combines a rigid stainless leaf with a welded wrap-around frame made to suit the host wall thickness. Brushed 304 stainless steel is suitable for many controlled production areas, while 316L can be selected where chloride exposure or stronger cleaning chemistry requires additional corrosion resistance. A closed-cell polyurethane core supports the skins and limits hollow resonance without creating exposed organic edges.

主要な特徴

Brushed stainless surfaces remain non-porous and do not depend on a painted topcoat.

Welded and polished frame corners reduce open seams around the structural opening.

A closed-cell core adds stiffness and limits moisture migration inside the leaf.

Purpose-built stainless hinges support wide clear opening angles and frequent operation.

Matching architraves, kick plates and glazing trims create a consistent metal finish.

アプリケーションのソリューション

Stainless doors are selected where surface corrosion, coating damage and difficult frame seams would shorten the service life of a conventional doorset.

Paint chips expose carbon steel after repeated impact and aggressive cleaning.Solid stainless facings retain corrosion resistance even when the brushed surface is locally marked.

Open frame mitres trap moisture and cleaning residue.Welded, dressed frame corners replace open mechanical joints at the visible perimeter.

Moisture entering a porous infill can swell or delaminate the leaf.Closed-cell polyurethane and capped edges isolate the internal construction.

Mixed-finish accessories create small corrosion points around a premium door.Stainless hinges, handles, trims and protection plates maintain material continuity.

典型的な用途

Sterile pharmaceutical processingBiotechnology washdown roomsHospital sterile support suites食品 · 飲料衛生エリアChemical-cleaning laboratories

技術的なパラメータ

Representative dimensions for a brushed stainless steel cleanroom doorset are listed below.

コア材料	Closed-cell rigid polyurethane foam
パネルの厚さ	50 mmの扉板
有効幅	Up to 1250 mm single-leaf clear opening
最大長さ	2400 mm maximum clear opening height
鋼鉄の厚さを直面する	1.0-1.6 mm 304 or 316L stainless steel
コア密度	40-45 kg/m³ closed-cell polyurethane
熱伝導率	一般的なポリウレタン芯材範囲0.022-0.028 W/(m·K)
表面仕上げ	240-grit or No. 4 brushed stainless steel
ジョイントタイプ	Welded wrap-around frame with continuous elastomer perimeter seal
カスタマイズ	目的のアプリケーションおよび動作環境に基づいて利用可能

利用可能なオプション

316L stainless constructionFlush double-glazed vision panelFull-height stainless kick protectionElectric closer or flush maglock

Planning a Stainless Steel Cleanroom Door specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する