Complete brushed stainless steel cleanroom door with welded frame

Pintu Cleanroom, Jendela dan Sistem Interlock

Pintu Stainless Steel Cleanroom Pintu Stainless Steel Cleanroom

A welded stainless steel doorset with a 50 mm insulated leaf, brushed non-porous faces and minimal visible fixings for chemically cleaned or washdown-controlled interiors.

Baja anti karat 304 atau 316L
Brushed Hygienic Finish
Welded Wrap-Around Frame
Heavy-Duty Cleanroom Hardware

Permintaan untuk kutipan Browse Produk

Perkenalan produk

The Stainless Steel Cleanroom Door combines a rigid stainless leaf with a welded wrap-around frame made to suit the host wall thickness. Brushed 304 stainless steel is suitable for many controlled production areas, while 316L can be selected where chloride exposure or stronger cleaning chemistry requires additional corrosion resistance. A closed-cell polyurethane core supports the skins and limits hollow resonance without creating exposed organic edges.

Fitur utama:

Brushed stainless surfaces remain non-porous and do not depend on a painted topcoat.

Welded and polished frame corners reduce open seams around the structural opening.

A closed-cell core adds stiffness and limits moisture migration inside the leaf.

Purpose-built stainless hinges support wide clear opening angles and frequent operation.

Matching architraves, kick plates and glazing trims create a consistent metal finish.

Solusi untuk aplikasi Anda

Stainless doors are selected where surface corrosion, coating damage and difficult frame seams would shorten the service life of a conventional doorset.

Paint chips expose carbon steel after repeated impact and aggressive cleaning.Solid stainless facings retain corrosion resistance even when the brushed surface is locally marked.

Open frame mitres trap moisture and cleaning residue.Welded, dressed frame corners replace open mechanical joints at the visible perimeter.

Moisture entering a porous infill can swell or delaminate the leaf.Closed-cell polyurethane and capped edges isolate the internal construction.

Mixed-finish accessories create small corrosion points around a premium door.Stainless hinges, handles, trims and protection plates maintain material continuity.

Aplikasi yang Tipis

Sterile pharmaceutical processingBiotechnology washdown roomsHospital sterile support suitesArea kebersihan makanan dan minuman (food and beverage hygiene area)Chemical-cleaning laboratories

Parameter teknis

Representative dimensions for a brushed stainless steel cleanroom doorset are listed below.

Bahan inti	Closed-cell rigid polyurethane foam
Ketebalan Panel (Panel Thickness)	Daun pintu 50 mm
Efektif lebar	Up to 1250 mm single-leaf clear opening
Panjang maksimum	2400 mm maximum clear opening height
Baja menghadap ketebalan	1.0-1.6 mm 304 or 316L stainless steel
Kepadatan inti (core density)	40-45 kg/m³ closed-cell polyurethane
Konduktivitas Termal (Thermal Conductivity)	0.022-0.028 W/(m·K) typical polyurethane core range
Permukaan selesai	240-grit or No. 4 brushed stainless steel
Jenis Bersama	Welded wrap-around frame with continuous elastomer perimeter seal
Customization (Kustomisasi)	A Tersedia berdasarkan aplikasi dan lingkungan operasi yang dimaksudkan

Pilihan yang tersedia

316L stainless constructionFlush double-glazed vision panelFull-height stainless kick protectionElectric closer or flush maglock

Planning a Stainless Steel Cleanroom Door specification?

Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.

Bicaralah dengan tim kami