Homogeneous PVC sheet flooring roll with matching welding rod

クリーンルームフロアシステム

均質な PVC シートフローリング

A compact single-layer PVC floor covering whose color and pattern extend through the full 2 mm thickness for durable, repairable clean-area surfaces.

Full-Thickness Wear Layer
Heat-Welded Seams
Compact 2 mm Construction
Restorable PUR Surface

見積もりリクエスト製品案内

商品紹介

Homogeneous PVC sheet flooring is manufactured as one compact wear layer rather than a printed film over a backing. The through-pattern construction helps small abrasions remain less conspicuous and permits compatible surface-restoration methods during the service life. Two-metre-wide sheets reduce the number of field seams, and matching welding rod closes sheet junctions after adhesive installation. A factory PUR treatment supports routine machine cleaning without adding a separate site-applied coating.

主要な特徴

Color and pattern continue through the entire wear layer instead of relying on a thin decorative print film.

Wide rolls cover corridors and rooms with fewer joints than modular tile layouts.

Hot-welded seams create a closed junction that resists routine wet cleaning when correctly installed.

A compact PUR-treated surface improves stain release and can be mechanically refreshed with compatible maintenance methods.

アプリケーションのソリューション

A resilient clean-area floor must remain presentable under rolling traffic while limiting joints and avoiding a fragile decorative layer.

Surface scratches expose a visibly different backing layer on conventional printed flooring.The homogeneous construction carries the visual pattern through the full 2 mm gauge.

Numerous tile joints lengthen cleaning time and increase seam-maintenance points.Two-metre-wide sheets reduce joint count and accept color-matched heat welding.

Repeated polishing adds chemicals and labor to controlled-area maintenance.The factory PUR treatment supports routine cleaning and compatible dry-buff restoration.

典型的な用途

クリーンルーム支援廊下Healthcare preparation rooms実験室循環エリアGowning and changing roomsControlled manufacturing support spaces

技術的なパラメータ

Typical dimensions and material values for commercial Type I homogeneous PVC sheet flooring are shown below.

コア材料	Single-layer compact PVC compound with mineral filler, color pigments and plasticizer
パネルの厚さ	2.0 mm total homogeneous wear thickness
有効幅	2000 mm標準シート幅
最大長さ	Up to 23000 mm standard roll length
鋼鉄の厚さを直面する	0 mm; no steel facing is used in the PVC sheet
コア密度	Approximately 1375–1500 kg/m³ based on common 2.0 mm commercial sheet weights
熱伝導率	Approximately 0.20–0.25 W/(m·K) for compact homogeneous PVC
表面仕上げ	Non-directional matte pattern with factory-applied PUR treatment
ジョイントタイプ	Fully adhered butt seams routed and closed with color-matched hot-welding rod
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Non-directional neutral and zoning colorsMatching hot-welding rodSite-formed coved skirting with cove formerSheet or 610 mm modular tile format

Planning a Homogeneous PVC Sheet Flooring specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する