日本語
ポルトガル語
スペイン語
マレー語
インドネシア語
ドイツ人。
トルコ語
ベトナム語
フランス語で
ロシア語
アラビア語：アラビア語
タイ語
日本語で。流れ
韓国語
商品紹介
The explosion vent mounts over a calculated relief opening on a vessel, collector or duct. A scored or domed membrane remains sealed under normal pressure and ruptures at its specified burst condition, providing a large low-inertia discharge area. The clamping frame, gasket and support arrangement are selected for pressure cycling, temperature and cleaning conditions.
主要な特徴
A perimeter gasket maintains normal process containment.
Stainless construction supports hygienic and corrosion-sensitive service.
A burst sensor can initiate shutdown and alarm sequences.
アプリケーションのソリューション
Combustible dust equipment needs rapid pressure relief without allowing normal product leakage or contamination around the opening.
A heavy door responds too slowly to a fast pressure rise.A low-inertia rupture membrane opens across its designed relief area.
Pressure cycling fatigues an unsuitable vent element.Membrane profile and support are selected for the normal vacuum and pressure cycle.
Product and wash liquid can collect at rough frame joints.A stainless hygienic frame and continuous compatible gasket reduce crevices.
A burst event must stop connected equipment.An optional rupture indicator sends an immediate interlock signal.
典型的な用途
Dust collectorsPowder process vesselsHygienic conveying systemsFilter and dryer equipment
技術的なパラメータ
Typical physical construction is listed below; vent area, burst pressure and discharge routing require process-specific explosion-protection engineering.
| コア材料 | AISI 304 or 316L stainless rupture membrane and clamping frame |
|---|---|
| パネルの厚さ | 0.2-1.0 mm engineered rupture membrane |
| 有効幅 | 150-1000 mm nominal opening width |
| 最大長さ | Up to 1500 mm vent dimension |
| 鋼鉄の厚さを直面する | 0.2-1.0 mm rupture membrane surface |
| コア密度 | ステンレス部品用7900-8000 kg/m³ |
| 熱伝導率 | ステンレス部品用14-16 W/(m·K) |
| 表面仕上げ | Satin, pickled or electropolished stainless |
| ジョイントタイプ | Gasketed bolted clamping frame with replaceable rupture element |
| カスタマイズ | 意図したアプリケーションと動作環境に基づいて利用できます。 |
利用可能なオプション
Flat or domed membrane316L hygienic frameBurst indicatorCircular or rectangular opening
Planning a Explosion Vent specification?
寸法、設置条件、性能目標、必要な表面仕上げをお送りください。
