Complete compact HPL cleanroom door with coloured laminate face

クリーンルームのドア、窓およびインターロックシステム

コンパクトな HPL クリーンルームのドア

A reinforced 50 mm hygienic leaf clad with compact high-pressure laminate, offering a hard, colour-stable surface for laboratories, healthcare corridors and busy change areas.

5 mm Compact HPL Faces
Hard Impact-Tolerant Surface
Wide Colour Selection
Sealed Molded Edge Detail

見積もりリクエスト製品案内

商品紹介

The Compact HPL Cleanroom Door uses dense laminate faces over a reinforced internal sheet and lightweight honeycomb. HPL supplies the visible colour and wear surface, while the concealed reinforcement supports locks, hinges and closers. Sealed edge profiles prevent the layered construction from being exposed at the perimeter. This format is useful where interior designers need stronger colour differentiation or a warm non-metal appearance without using porous timber faces.

主要な特徴

Dense compact laminate resists routine abrasion and many common cleaning agents.

Pigmented decorative faces provide wayfinding colours without a site-applied paint layer.

Concealed sheet reinforcement spreads hinge and lock loads through the leaf.

Closed edge profiles isolate the honeycomb and laminate cut edges from cleaning moisture.

Smooth faces can be machined precisely for flush glazing and integrated hardware.

アプリケーションのソリューション

HPL door buyers want a durable coloured surface without exposed substrate edges, weak hardware fixings or difficult-to-clean trim.

Painted colour coding becomes scratched and uneven after repeated contact.Factory laminate provides a consistent hard colour surface across the complete leaf.

Raw laminate edges reveal layered material and absorb moisture.Molded or extruded perimeter caps close every machined edge.

Honeycomb alone does not hold heavy closer and lock screws reliably.Galvanized reinforcement inserts are bonded behind every hardware zone.

Projecting glazing beads interrupt the otherwise flat laminate face.Flush-set glass and slim sealed trims maintain an even cleaning plane.

典型的な用途

病院のきれいな廊下Laboratory suitesGowning and changing rooms医療機器施設医薬品サポートエリア

技術的なパラメータ

Representative dimensions for a reinforced compact HPL cleanroom door leaf are listed below.

コア材料	Flame-retardant paper honeycomb with galvanized reinforcement inserts
パネルの厚さ	45-50 mm door leaf
有効幅	800-1200mmシングルリーフクリアオープニング
最大長さ	2400mm最大リーフ高さ
鋼鉄の厚さを直面する	0 mm steel facing; 1.2 mm concealed galvanized reinforcement beneath 5 mm compact HPL faces
コア密度	30-50 kg/m³ paper honeycomb
熱伝導率	0.07-0.10 W/(m·K) typical paper honeycomb range
表面仕上げ	Smooth compact high-pressure laminate in selected solid colour
ジョイントタイプ	Sealed molded leaf edge within an aluminum or stainless steel gasketed frame
カスタマイズ	目的のアプリケーションおよび動作環境に基づいて利用可能

利用可能なオプション

Contrasting two-side coloursFlush observation windowStainless kick protectionAntimicrobial laminate selection

Planning a Compact HPL Cleanroom Door specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する