Complete compact HPL cleanroom door with coloured laminate face

클린룸 도어, 창문 및 인터락 시스템

컴팩트한 HPL 클린룸 문

A reinforced 50 mm hygienic leaf clad with compact high-pressure laminate, offering a hard, colour-stable surface for laboratories, healthcare corridors and busy change areas.

5 mm Compact HPL Faces
Hard Impact-Tolerant Surface
Wide Colour Selection
Sealed Molded Edge Detail

견적 요청 제품 찾아보기

상품 소개

The Compact HPL Cleanroom Door uses dense laminate faces over a reinforced internal sheet and lightweight honeycomb. HPL supplies the visible colour and wear surface, while the concealed reinforcement supports locks, hinges and closers. Sealed edge profiles prevent the layered construction from being exposed at the perimeter. This format is useful where interior designers need stronger colour differentiation or a warm non-metal appearance without using porous timber faces.

주요 기능

Dense compact laminate resists routine abrasion and many common cleaning agents.

Pigmented decorative faces provide wayfinding colours without a site-applied paint layer.

Concealed sheet reinforcement spreads hinge and lock loads through the leaf.

Closed edge profiles isolate the honeycomb and laminate cut edges from cleaning moisture.

Smooth faces can be machined precisely for flush glazing and integrated hardware.

응용 프로그램 솔루션

HPL door buyers want a durable coloured surface without exposed substrate edges, weak hardware fixings or difficult-to-clean trim.

Painted colour coding becomes scratched and uneven after repeated contact.Factory laminate provides a consistent hard colour surface across the complete leaf.

Raw laminate edges reveal layered material and absorb moisture.Molded or extruded perimeter caps close every machined edge.

Honeycomb alone does not hold heavy closer and lock screws reliably.Galvanized reinforcement inserts are bonded behind every hardware zone.

Projecting glazing beads interrupt the otherwise flat laminate face.Flush-set glass and slim sealed trims maintain an even cleaning plane.

일반적인 응용 프로그램

병원 깨끗한 복도Laboratory suitesGowning and changing roomsMedical-device facilities제약 지원 분야

기술 매개변수

Representative dimensions for a reinforced compact HPL cleanroom door leaf are listed below.

핵심 재료	Flame-retardant paper honeycomb with galvanized reinforcement inserts
패널 두께	45-50 mm door leaf
유효 폭	800-1200 mm single-leaf clear opening
최대 길이	2400 mm 최대 잎 높이
강철 면면 두께	0 mm steel facing; 1.2 mm concealed galvanized reinforcement beneath 5 mm compact HPL faces
코어 밀도	30-50 kg/m³ paper honeycomb
열전도도 (Thermal Conductivity)	0.07-0.10 W/(m·K) typical paper honeycomb range
표면 마무리	Smooth compact high-pressure laminate in selected solid colour
접합 유형	Sealed molded leaf edge within an aluminum or stainless steel gasketed frame
사용자 정의	사용 대상 어플리케이션 및 운영 환경에 따라 사용 가능

사용 가능한 옵션

Contrasting two-side coloursFlush observation windowStainless kick protectionAntimicrobial laminate selection

Planning a Compact HPL Cleanroom Door specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.