Bahasa Inggris
Bahasa Portugis
Bahasa Spanyol
Bahasa Melayu
Bahasa IndonesiaSaat ini
Bahasa Jerman
Bahasa Turki
Bahasa Vietnam
Bahasa Perancis: Bahasa Perancis
Bahasa Rusia
Bahasa Arab
Bahasa Thailand
Bahasa Jepang
Bahasa Korea
Aliran Laminar dan Peralatan Penahanan
Vertikal Laminar Flow Clean Bench
Clean bench dengan filter atas yang mengarahkan udara tersaring HEPA secara seragam ke bawah melintasi produk non-berbahaya dan permukaan kerja baja tahan karat.
- Top-Mounted HEPA Supply
- Uniform Vertical Downflow (Alir Vertikal)
- Stainless Work Surface
- Compact Bench Depth
Perkenalan produk
The vertical clean bench places its fan-filter section above the work zone so filtered air moves from the ceiling diffuser toward the perforated or open work area. This arrangement keeps the cabinet depth compact and allows larger instruments to sit near the rear wall without blocking a rear filter face. The inner liner and work tray are formed from cleanable stainless steel, while a clear front sash helps limit room-air disturbance. It is intended for non-hazardous assembly, preparation and inspection work that requires product protection rather than personnel containment.
Fitur utama:
The top-mounted fan-filter section preserves usable rear-wall space for instruments and fixtures.
A removable stainless work tray exposes the lower collection area for cleaning.
The adjustable front sash reduces cross-drafts while retaining comfortable hand access.
A differential-pressure indicator makes filter loading visible during routine operation.
Solusi untuk aplikasi Anda
A vertical bench must maintain clean downward airflow without allowing tall equipment, room drafts or service work to compromise the protected zone.
Tall instruments create stagnant pockets beneath a small supply grille.A full-width ceiling diffuser distributes air around equipment footprints from above.
Room movement disturbs the open working face.The lowered clear sash and side panels shield the downflow while preserving access.
Spills collect beneath a fixed work surface.Lift-out stainless work sections provide direct cleaning access to the lower pan.
Operators cannot see gradual filter loading.A visible pressure gauge or electronic alarm indicates increasing resistance.
Aplikasi yang Tipis
Rakitan perangkat medisOptical component inspectionCulture-media preparation with non-hazardous materialsPrecision electronics handling
Parameter teknis
Typical configurable construction ranges for a vertical laminar flow clean bench are listed below.
| Bahan inti | SUS304 work-zone liner with a powder-coated steel outer cabinet and mineral-wool acoustic infill |
|---|---|
| Ketebalan Panel (Panel Thickness) | 25-40 mm double-skin cabinet sections |
| Efektif lebar | 900 - 1800 mm lebar kerja yang jelas |
| Panjang maksimum | Hingga 2200 mm ketinggian kabinet keseluruhan |
| Baja menghadap ketebalan | 0.8-1.2 mm powder-coated steel; 1.0-1.2 mm SUS304 work-zone liner |
| Kepadatan inti (core density) | 80 - 120 kg / m3 mineral-wol akustik infill |
| Konduktivitas Termal (Thermal Conductivity) | 0.035-0.045 W/(m · K) untuk infill mineral wool |
| Permukaan selesai | Low-sheen white powder coating outside with brushed SUS304 work surfaces |
| Jenis Bersama | Sealed double-skin cabinet seams with a removable work tray and gasketed HEPA filter frame |
| Customization (Kustomisasi) | Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi. |
Pilihan yang tersedia
HEPA or ULPA final filterManual or motorized front sashUV-resistant clear side panelsElectrical outlets and service taps
Planning a Vertical Laminar Flow Clean Bench specification?
Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.
