Three-quarter view of a complete vertical laminar flow clean bench

Laminar Flow and Containment Equipment 에 대한 리뷰 보기

수직 층류 클린 벤치

비유해 제품과 스테인리스 작업면 위로 균일한 HEPA 여과 공기를 아래 방향으로 공급하여 제품을 보호하는 상부 필터형 클린 벤치입니다.

Top-Mounted HEPA Supply
균일 한 수직 다운 플로우
Stainless Work Surface
Compact Bench Depth

견적 요청 제품 찾아보기

상품 소개

The vertical clean bench places its fan-filter section above the work zone so filtered air moves from the ceiling diffuser toward the perforated or open work area. This arrangement keeps the cabinet depth compact and allows larger instruments to sit near the rear wall without blocking a rear filter face. The inner liner and work tray are formed from cleanable stainless steel, while a clear front sash helps limit room-air disturbance. It is intended for non-hazardous assembly, preparation and inspection work that requires product protection rather than personnel containment.

주요 기능

A full-width ceiling diffuser spreads filtered air over the complete work surface.

The top-mounted fan-filter section preserves usable rear-wall space for instruments and fixtures.

A removable stainless work tray exposes the lower collection area for cleaning.

The adjustable front sash reduces cross-drafts while retaining comfortable hand access.

A differential-pressure indicator makes filter loading visible during routine operation.

응용 프로그램 솔루션

A vertical bench must maintain clean downward airflow without allowing tall equipment, room drafts or service work to compromise the protected zone.

Tall instruments create stagnant pockets beneath a small supply grille.A full-width ceiling diffuser distributes air around equipment footprints from above.

Room movement disturbs the open working face.The lowered clear sash and side panels shield the downflow while preserving access.

Spills collect beneath a fixed work surface.Lift-out stainless work sections provide direct cleaning access to the lower pan.

Operators cannot see gradual filter loading.A visible pressure gauge or electronic alarm indicates increasing resistance.

일반적인 응용 프로그램

의료 장치 조립Optical component inspectionCulture-media preparation with non-hazardous materialsPrecision electronics handling

기술 매개변수

Typical configurable construction ranges for a vertical laminar flow clean bench are listed below.

핵심 재료	SUS304 work-zone liner with a powder-coated steel outer cabinet and mineral-wool acoustic infill
패널 두께	25-40 mm double-skin cabinet sections
유효 폭	900 - 1800 mm 명확한 작업 폭
최대 길이	전체 캐비닛 높이 최대 2200 mm
강철 면면 두께	0.8-1.2 mm powder-coated steel; 1.0-1.2 mm SUS304 work-zone liner
코어 밀도	80 - 120 kg / m 3 미네랄 울 음향 충전
열전도도 (Thermal Conductivity)	미네랄 울 충전을위한 0.035-0.045 W/(m · K)
표면 마무리	Low-sheen white powder coating outside with brushed SUS304 work surfaces
접합 유형	Sealed double-skin cabinet seams with a removable work tray and gasketed HEPA filter frame
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

HEPA 또는 ULPA 최종 필터Manual or motorized front sashUV-resistant clear side panelsElectrical outlets and service taps

Planning a Vertical Laminar Flow Clean Bench specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.