Bahasa Inggris
Bahasa Jerman
Bahasa Arab
Bahasa Perancis: Bahasa Perancis
Bahasa IndonesiaSaat ini
Bahasa Jepang
Bahasa Korea
Bahasa Melayu
Bahasa Portugis
Bahasa Rusia
Bahasa Spanyol
Bahasa Thailand
Bahasa Turki
Bahasa Vietnam
Electrical path through resin
The binder formulation provides the conductive phase, allowing the floor to combine mineral appearance with a controlled discharge route.
STJH-SEAMLESS-EPOXY-TERRAZZO-FLOORING-CONDUCTIVE-ESD
Seamless Epoxy Terrazzo Flooring Conductive
A mineral terrazzo finish that incorporates an electrically conductive resin matrix.
- Conductive epoxy matrix
- 6.3-9.5 mm terrazzo course
- Compatible clear ESD finish
About This Product
Conductive terrazzo adds a deliberate electrical function to the decorative aggregate floor. The selected construction uses a dark conductive epoxy matrix with mineral chips and a compatible clear ESD urethane finish. Its 6.3-9.5 mm wearing course is ground and sealed like a terrazzo surface, while grounding and electrical continuity remain part of the installation rather than being inferred from the visible stone pattern.
Fitur utama:
Purpose-matched sealer
A compatible ESD finish preserves the intended surface behavior; an ordinary insulating polish would undermine that function.
Decorative contrast
Mineral chips stand out against the dark matrix, giving this system a recognizable appearance without changing the electrical binder.
Parameter teknis
| Binder | Conductive epoxy |
|---|---|
| Solids Content | 100% solids binder |
| Wearing Thickness | 6.3-9.5 mm |
| Matrix Color | Black |
| Aggregate | Graded mineral chips |
| Sealer | Clear ESD urethane |
| Installation | Trowel, grind, grout and seal |
| Electrical Function | Conductive floor with connected grounding |
| Surface Form | Polished seamless terrazzo |
| Customization (Kustomisasi) | Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi. |
Applications
Consider this finish for aerospace support rooms, pharmaceutical technical interiors and other facilities combining a decorative hard floor with an ESD strategy. Footwear, grounding points and the completed surface should be evaluated together; a visually continuous floor does not by itself establish electrical continuity across every detail.
Solutions for Your Application
A maintenance polish changes the electrical behavior of the floor.
Use the specified ESD-compatible care system and repeat resistance checks after any surface treatment.
The decorative design interrupts the conductive path at dividers.
Coordinate divider and grounding details before placing the terrazzo, then test representative areas across the completed layout.
Pilihan yang tersedia
Choose mineral chip blends within the conductive dark matrix, divider arrangements and compatible perimeter details. Include the operating electrical criteria in the inquiry so that material selection and the testing method address the same intended function.
Planning a Seamless Epoxy Terrazzo Flooring Conductive specification?
Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.
