Bahasa Inggeris
Bahasa Jerman
Bahasa Arab (Bahasa Melayu)
Bahasa Perancis
Bahasa Indonesia: Bahasa Indonesia
Bahasa Jepun
Bahasa Korea (Bahasa Melayu)
Bahasa Melayu (Bahasa Melayu)Semasa
Bahasa Portugis: Bahasa Portugis: Bahasa Portugis
Bahasa Rusia
Bahasa Sepanyol: Bahasa Sepanyol: Bahasa Sepanyol
Bahasa Melayu (Bahasa Melayu)
Bahasa Turki: Bahasa Turki
Bahasa Vietnam (Bahasa Melayu)
Electrical path through resin
The binder formulation provides the conductive phase, allowing the floor to combine mineral appearance with a controlled discharge route.
STJH-SEAMLESS-EPOXY-TERRAZZO-FLOORING-CONDUCTIVE-ESD
Seamless Epoxy Terrazzo Flooring Conductive
A mineral terrazzo finish that incorporates an electrically conductive resin matrix.
- Conductive epoxy matrix
- 6.3-9.5 mm terrazzo course
- Compatible clear ESD finish
About This Product
Conductive terrazzo adds a deliberate electrical function to the decorative aggregate floor. The selected construction uses a dark conductive epoxy matrix with mineral chips and a compatible clear ESD urethane finish. Its 6.3-9.5 mm wearing course is ground and sealed like a terrazzo surface, while grounding and electrical continuity remain part of the installation rather than being inferred from the visible stone pattern.
Ciri-ciri Utama
Purpose-matched sealer
A compatible ESD finish preserves the intended surface behavior; an ordinary insulating polish would undermine that function.
Decorative contrast
Mineral chips stand out against the dark matrix, giving this system a recognizable appearance without changing the electrical binder.
Parameter teknikal
| Binder | Conductive epoxy |
|---|---|
| Solids Content | 100% solids binder |
| Wearing Thickness | 6.3-9.5 mm |
| Matrix Color | Black |
| Aggregate | Graded mineral chips |
| Sealer | Clear ESD urethane |
| Installation | Trowel, grind, grout and seal |
| Electrical Function | Conductive floor with connected grounding |
| Surface Form | Polished seamless terrazzo |
| Penyesuaian | Boleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi. |
Applications
Consider this finish for aerospace support rooms, pharmaceutical technical interiors and other facilities combining a decorative hard floor with an ESD strategy. Footwear, grounding points and the completed surface should be evaluated together; a visually continuous floor does not by itself establish electrical continuity across every detail.
Solutions for Your Application
A maintenance polish changes the electrical behavior of the floor.
Use the specified ESD-compatible care system and repeat resistance checks after any surface treatment.
The decorative design interrupts the conductive path at dividers.
Coordinate divider and grounding details before placing the terrazzo, then test representative areas across the completed layout.
Pilihan yang boleh didapati
Choose mineral chip blends within the conductive dark matrix, divider arrangements and compatible perimeter details. Include the operating electrical criteria in the inquiry so that material selection and the testing method address the same intended function.
Planning a Seamless Epoxy Terrazzo Flooring Conductive specification?
Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.
