STjh medium 600 mm negative-pressure containment pass box with vacuum-glass door, exhaust grille and pressure gauge

STJH-NEGATIVE-PRESSURE-CONTAINMENT-PASS-BOX-600

Negative-Pressure Containment Pass Box 600 mm

A 600 mm stainless negative-pressure chamber for routine transfer where operators need more load volume and clear two-side visibility.

600 mm routine-transfer cube
Double-layer vacuum-glass windows
Mechanical two-door interlock

Permintaan untuk kutipan Browse Produk

Perkenalan produk

The intermediate model expands the work zone to 600 x 600 x 600 mm while keeping a 760 x 600 x 690 mm external body. Its 1.2 mm SUS304 shell, mechanical interlock and double-layer vacuum-glass door windows support routine containment transfers with visual confirmation from either room. Compared with the 500 mm model, it accepts wider trays without committing to the largest 700 mm cube.

Fitur utama:

Balanced chamber volume

The 600 mm cube fits common laboratory trays and sealed totes while limiting wall-opening growth.

Two-side load visibility

Double-layer glazing lets users check chamber occupancy and door status before operating the interlock.

Containment airflow bias

The negative-pressure arrangement directs leakage away from the clean side during the transfer sequence.

Parameter teknis

Work Zone	600 W x 600 D x 600 H mm
External Dimensions	760 W x 600 D x 690 H mm
Chamber Material	1.2 mm SUS304 stainless steel
Operating Pressure	Negative relative to the clean-side room
Airflow Direction	From clean side to contaminated side
Door Interlock	Mechanical
Viewing Window	Double-layer vacuum glass
Interior Form	Cleanable stainless work zone
Typical Transfer	Medium trays, packs and closed containers
Customization (Kustomisasi)	Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi.

Applications

Suitable for hospital laboratories, pharmaceutical containment rooms and research facilities transferring sealed samples, equipment packs or waste containers toward a less-clean side. Allow access for pressure checks and cleaning around the viewing-window and door-gasket assemblies.

Solutions for Your Application

Operators cannot confirm whether the chamber is occupied before attempting a contained handoff.Use the double-layer viewing windows to verify load position from both sides before releasing the mechanically interlocked door.

The 500 mm version requires frequent splitting of routine tray loads.The 600 mm internal cube increases usable volume while remaining more compact than the 700 mm model.

Pilihan yang tersedia

Specify pressure indication, exhaust routing, door orientation, wall flange and access for filter or duct service where required by the selected system. Confirm compatible cleaning chemicals for the glazing, seals and SUS304 interior.

Planning a Negative-Pressure Containment Pass Box 600 mm specification?

Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.

Bicaralah dengan tim kami