Low-effluent misting
Fine droplets bind surface contamination with much less water than a high-volume deluge.
This walk-through unit applies an 8 L/min mist to damp full-body PPE before controlled removal. Its 1110 x 1300 x 2400 mm enclosure suits a permanent exit point, while the 1/2 in water connection and 2.8 bar minimum supply define the utility requirement. It is intended as a garment wet-down stage, not as an emergency drench shower for exposed skin.
Fine droplets bind surface contamination with much less water than a high-volume deluge.
An 8 L/min flow and 2.8 bar minimum pressure simplify water and drainage sizing.
The cubicle keeps the wet-down action inside a dedicated boundary before PPE doffing.
| External Dimensions | 1110 W x 1300 D x 2400 H mm |
|---|---|
| Water Flow | 8 L/min |
| Minimum Water Pressure | 2.8 bar |
| Water Inlet | 1/2 in male connection |
| Nominal Weight | 80 kg |
| Support Construction | Galvanised frame and supports |
| Enclosure | Panelled walk-through cubicle |
| Activation | Manual or automatic fine-mist cycle |
| Process Function | Protective-suit wet-down before doffing |
| Customization (Kustomisasi) | Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi. |
For pharmaceutical laboratories, powder packaging rooms and controlled maintenance exits where PPE must be damped before removal. Confirm compatible wetting fluid, collection capacity and the downstream doffing procedure.
Specify manual or automatic initiation, enclosure finish, door arrangement, mist-fluid compatibility and drain connection. Verify supply pressure at peak site demand.
Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.