Cleanroom Drainage, Peralatan Kebersihan dan Keselamatan

Stainless Steel Trench Drain

Load-bearing stainless trench drain for higher washdown volumes and wheeled cleanroom equipment routes.

Reinforced Load-Bearing Edges
Grating Hygienic yang Dapat Dilepas
Sloped Radiused Channel
Cleanable Outlet Sump

Perkenalan produk

The stainless steel trench drain provides a deeper, wider collection channel for clean manufacturing routes exposed to higher wash volumes or wheeled traffic. Reinforced edge rails support removable bar, ladder or hygienic grating, while a formed longitudinal fall guides water to a cleanable sump or direct outlet. Continuously welded radiused interiors remain accessible after the grate is lifted.

Fitur utama:

Reinforced edge rails distribute wheel loads around the channel opening.

Lift-out grating exposes the channel and sump for cleaning.

A built-in fall directs wash water and reduces stagnant zones.

Custom depth, width and outlet position suit the floor and hydraulic load.

Solusi untuk aplikasi Anda

High-volume wash zones and wheeled routes require stronger channel edges and greater hydraulic capacity without sacrificing cleanability.

Trolley and equipment wheels can deform lightly supported drain edges.Reinforced stainless edge rails transfer loading into the surrounding floor structure.

Deep channels can hide sediment beneath fixed grating.Removable load-rated grates expose the full radiused channel and sump.

Large wash volumes may pond in a flat trench.A fabricated longitudinal fall and sized outlet guide flow toward the discharge point.

Standard channel depths may conflict with slab or utility constraints.Clear width, depth, section length and sump arrangement are configurable for the installation.

Aplikasi yang Tipis

Equipment wash areasSterile utility roomsClean manufacturing floorsHygienic logistics routes

Parameter teknis

Typical construction ranges for a load-bearing stainless trench are listed below; grate, depth and outlet are selected for flow, wheel load and floor build-up.

Bahan inti	AISI 304 or 316L stainless steel channel and edge rails
Ketebalan Panel (Panel Thickness)	2.0-3.0 mm channel wall
Efektif lebar	150-500 mm clear trench width
Panjang maksimum	Hingga 6000 mm per bagian yang dibuat
Baja menghadap ketebalan	2.0-3.0 mm exposed stainless surfaces
Kepadatan inti (core density)	7900 - 8000 kg / m3 untuk baja tahan karat
Konduktivitas Termal (Thermal Conductivity)	14 - 16 W / (m · K) untuk baja tahan karat
Permukaan selesai	Acar dan pasif atau satin-selesai stainless steel
Jenis Bersama	Continuously welded channel modules with flanged transport-section joints
Customization (Kustomisasi)	Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi.

Pilihan yang tersedia

304 atau 316L kelas150-500 mm clear widthBar, ladder or hygienic grateCustom depth, sump and load rating

Planning a Stainless Steel Trench Drain specification?

Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.

Bicaralah dengan tim kami