Complete stainless steel trench drain in diagonal three-quarter view

Peralatan Saliran Bilik Bersih, Kebersihan dan Keselamatan

Parit Keluli Tahan Karat Saliran

Load-bearing stainless trench drain for higher washdown volumes and wheeled cleanroom equipment routes.

Reinforced Load-Bearing Edges
Removable Hygienic Grating
Sloped Radiused Channel
Cleanable Outlet Sump

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

The stainless steel trench drain provides a deeper, wider collection channel for clean manufacturing routes exposed to higher wash volumes or wheeled traffic. Reinforced edge rails support removable bar, ladder or hygienic grating, while a formed longitudinal fall guides water to a cleanable sump or direct outlet. Continuously welded radiused interiors remain accessible after the grate is lifted.

Ciri-ciri Utama

Reinforced edge rails distribute wheel loads around the channel opening.

Lift-out grating exposes the channel and sump for cleaning.

A built-in fall directs wash water and reduces stagnant zones.

Custom depth, width and outlet position suit the floor and hydraulic load.

Penyelesaian untuk permohonan anda

High-volume wash zones and wheeled routes require stronger channel edges and greater hydraulic capacity without sacrificing cleanability.

Trolley and equipment wheels can deform lightly supported drain edges.Reinforced stainless edge rails transfer loading into the surrounding floor structure.

Deep channels can hide sediment beneath fixed grating.Removable load-rated grates expose the full radiused channel and sump.

Large wash volumes may pond in a flat trench.A fabricated longitudinal fall and sized outlet guide flow toward the discharge point.

Standard channel depths may conflict with slab or utility constraints.Clear width, depth, section length and sump arrangement are configurable for the installation.

Permohonan yang biasa

Equipment wash areasSterile utility roomsClean manufacturing floorsHygienic logistics routes

Parameter teknikal

Typical construction ranges for a load-bearing stainless trench are listed below; grate, depth and outlet are selected for flow, wheel load and floor build-up.

Bahan Teras	AISI 304 or 316L stainless steel channel and edge rails
Ketebalan Panel	2.0-3.0 mm channel wall
Lebar berkesan	150-500 mm clear trench width
Panjang maksimum	Up to 6000 mm per fabricated section
Keluli Menghadapi Ketebalan	2.0-3.0 mm exposed stainless surfaces
Ketumpatan teras	7900-8000 kg/m³ for stainless steel
Kekonduksian Terma	14-16 W/(m·K) for stainless steel
Kemasan permukaan	Pickled and passivated or satin-finished stainless steel
Jenis Bersatu	Continuously welded channel modules with flanged transport-section joints
Penyesuaian	Boleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Pilihan yang boleh didapati

304 or 316L grade150-500 mm clear widthBar, ladder or hygienic grateCustom depth, sump and load rating

Planning a Stainless Steel Trench Drain specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami