Complete fire-rated rock wool cleanroom panel with steel facings

Sistem Dinding dan Langit-langit Cleanroom

Panel Cleanroom Wool Rock-Rated Api

A steel-faced rock wool cleanroom panel configured for fire-rated wall and ceiling assemblies, combining non-combustible mineral insulation, protected joints, controlled service openings and smooth hygienic room surfaces for clean manufacturing interiors.

High-Density Stone Wool Core
Fire-Rated Assembly Construction
Protected Interlocking Joints
Hygienic Steel Surfaces

Permintaan untuk kutipan Browse Produk

Perkenalan produk

Fire-Rated Rock Wool Cleanroom Panels use vertically oriented stone-wool lamellas between steel facings and incorporate joint, frame and fixing details that preserve integrity during fire exposure. The panel is treated as part of a complete wall or ceiling assembly rather than as an isolated core material. Higher density and increasing panel thickness support longer fire-resistance configurations, while metal edge closures protect the core and maintain a clean internal finish. The system is suitable for controlled areas that require both hygienic surfaces and compartmentation using tested mineral-core construction.

Fitur utama:

Stone wool insulation is inorganic and does not add a combustible foam core to the enclosure.

Vertical lamella orientation improves through-thickness mechanical support between the steel skins.

Joint geometry limits direct flame and hot-gas paths between adjacent modules.

Protected service openings preserve the continuity of the fire-separating layer.

Smooth room-side steel remains compatible with normal cleanroom wiping and disinfection.

Solusi untuk aplikasi Anda

Customers need the panel thickness, joint, support spacing and penetration details to work together as one fire-separating construction.

A non-combustible core alone does not stop hot gases passing through an open joint.Profiled interlocks, mineral packing and compatible fire-stop seals protect the full panel connection.

Unprotected service penetrations can bypass the fire-resisting wall.Tested collars, sleeves and perimeter seals close openings around cables, ducts and pipes.

Insufficient density or thickness reduces the available fire-resistance configuration.The selected stone-wool density and panel depth are matched to the required assembly duration.

Fire-focused materials can introduce rough surfaces into a hygienic room.Continuous steel skins and closed edges keep the mineral insulation outside the cleanable surface.

Aplikasi yang Tipis

Pharmaceutical fire-compartment partitionsClean corridors adjoining plant roomsBattery and electronics controlled areasLaboratory walls beside utility zonesMineral-core cleanroom ceilings

Parameter teknis

Common construction ranges for steel-faced fire-rated rock wool panels are shown below.

Bahan inti	Vertically oriented hydrophobic stone wool lamellas
Ketebalan Panel (Panel Thickness)	60, 80, 100, 120 or 150 mm
Efektif lebar	950, 1000 or 1150 mm
Panjang maksimum	6000 mm ZXQ000003
Baja menghadap ketebalan	0.50–0.80 mm
Kepadatan inti (core density)	100–150 kg/m³
Konduktivitas Termal (Thermal Conductivity)	0.039–0.045 W/(m·K)
Permukaan selesai	Pre-painted galvanized steel or stainless steel cleanroom finish
Jenis Bersama	Fire-protected tongue-and-groove joint with mineral packing and sealant
Customization (Kustomisasi)	A Tersedia berdasarkan aplikasi dan lingkungan operasi yang dimaksudkan

Pilihan yang tersedia

EN 13501-2 EI assembly configurationsAlternative rock wool densityStainless steel room-side faceFire-stopped service penetration modules

Planning a Fire-Rated Rock Wool Cleanroom Panel specification?

Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.

Bicaralah dengan tim kami