English
Португальский
Испанский язык
Японский
Индонезийский
Немецкий
Турецкий
Вьетнамский язык
Французский
Русский языкТекущий
Арабский язык
Тайский
Японский язык
Корейский
Стенные и потолочные системы для чистых комнат
Огнеустойчивый каменный шерсть чистый комнатный панель
A steel-faced rock wool cleanroom panel configured for fire-rated wall and ceiling assemblies, combining non-combustible mineral insulation, protected joints, controlled service openings and smooth hygienic room surfaces for clean manufacturing interiors.
- High-Density Stone Wool Core
- Fire-Rated Assembly Construction
- Protected Interlocking Joints
- Hygienic Steel Surfaces
Введение продукции
Fire-Rated Rock Wool Cleanroom Panels use vertically oriented stone-wool lamellas between steel facings and incorporate joint, frame and fixing details that preserve integrity during fire exposure. The panel is treated as part of a complete wall or ceiling assembly rather than as an isolated core material. Higher density and increasing panel thickness support longer fire-resistance configurations, while metal edge closures protect the core and maintain a clean internal finish. The system is suitable for controlled areas that require both hygienic surfaces and compartmentation using tested mineral-core construction.
Основные характеристики
Vertical lamella orientation improves through-thickness mechanical support between the steel skins.
Joint geometry limits direct flame and hot-gas paths between adjacent modules.
Protected service openings preserve the continuity of the fire-separating layer.
Smooth room-side steel remains compatible with normal cleanroom wiping and disinfection.
Решения для вашего приложения
Customers need the panel thickness, joint, support spacing and penetration details to work together as one fire-separating construction.
A non-combustible core alone does not stop hot gases passing through an open joint.Profiled interlocks, mineral packing and compatible fire-stop seals protect the full panel connection.
Unprotected service penetrations can bypass the fire-resisting wall.Tested collars, sleeves and perimeter seals close openings around cables, ducts and pipes.
Insufficient density or thickness reduces the available fire-resistance configuration.The selected stone-wool density and panel depth are matched to the required assembly duration.
Fire-focused materials can introduce rough surfaces into a hygienic room.Continuous steel skins and closed edges keep the mineral insulation outside the cleanable surface.
Типичные приложения
Pharmaceutical fire-compartment partitionsClean corridors adjoining plant roomsBattery and electronics controlled areasLaboratory walls beside utility zonesMineral-core cleanroom ceilings
Технические параметры
Common construction ranges for steel-faced fire-rated rock wool panels are shown below.
| Основной материал | Vertically oriented hydrophobic stone wool lamellas |
|---|---|
| Толщина панели | 60, 80, 100, 120 or 150 mm |
| эффективная ширина | 950, 1000 or 1150 mm |
| Максимальная длина | 6000 мм |
| Толщина линий стали | 0.50–0.80 mm |
| Плотность ядра | 100–150 kg/m³ |
| Теплопроводимость | 0.039–0.045 W/(m·K) |
| Поверхностная отделка | Pre-painted galvanized steel or stainless steel cleanroom finish |
| Объединенный тип | Fire-protected tongue-and-groove joint with mineral packing and sealant |
| Customization | Доступно в зависимости от предполагаемого приложения и операционной среды |
Доступные варианты
EN 13501-2 EI assembly configurationsAlternative rock wool densityStainless steel room-side faceFire-stopped service penetration modules
Planning a Fire-Rated Rock Wool Cleanroom Panel specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
