Aliran Laminar dan Peralatan Penahanan

Ceiling-Suspended Laminar Flow Hood

Hood HEPA atas yang digantung di atas peralatan proses untuk menciptakan zona udara bersih terarah ke bawah tanpa penopang yang dipasang di lantai.

Floor-Free Suspension
Overhead HEPA Downflow
Adjustable Hanging Height
Optional Flexible Curtains

Permintaan untuk kutipan Browse Produk

Perkenalan produk

The suspended hood mounts from the building structure above a filling point, inspection table or compact process machine. A rigid supply plenum distributes HEPA-filtered air through the lower diffuser, while adjustable threaded hangers set the operating height and maintain level. Optional clear curtains extend the protected zone without permanent walls. Structural loads, electrical routing and service clearance are coordinated above the ceiling, leaving the floor around the process accessible.

Fitur utama:

Four-point suspension keeps posts and bases away from the process floor.

A pressure-equalizing plenum supplies the complete lower diffuser evenly.

Height-adjustable hangers accommodate equipment and ceiling variations.

Flexible clear curtains can limit cross-drafts around selected sides.

A hinged or lift-down filter panel allows service from the clean side when required.

Solusi untuk aplikasi Anda

An overhead hood must deliver an even clean-air footprint while remaining structurally secure and serviceable above operating equipment.

Floor legs obstruct carts and cleaning around the process.Ceiling suspension leaves the floor perimeter open.

An uneven hanging frame tilts the airflow diffuser.Individually adjustable hangers allow the plenum to be leveled after installation.

Room cross-drafts shorten the protected downflow zone.Optional clear curtains extend from the hood edge around the critical process area.

Filter replacement conflicts with equipment below.A selected top-service or clean-side lift-down arrangement matches the available access route.

Aplikasi yang Tipis

Open-vial handling zonesClean filling-point coveragePrecision assembly islandsInspection tables beneath high ceilings

Parameter teknis

Typical configurable construction ranges for a ceiling-suspended laminar flow hood are listed below.

Bahan inti	Anodized aluminum plenum frame with powder-coated steel skins and aluminum honeycomb diffuser panels
Ketebalan Panel (Panel Thickness)	40-80 mm plenum and diffuser assembly
Efektif lebar	1200-3000 mm protected airflow width
Panjang maksimum	Up to 4000 mm protected airflow length
Baja menghadap ketebalan	Lapisan penuh baja berlapis bubuk 0.8-1.2mm
Kepadatan inti (core density)	30-50kg/mjinan inti diffuser sarang lebah aluminium
Konduktivitas Termal (Thermal Conductivity)	1.5-2.5 W/(m·K) across the aluminum honeycomb diffuser assembly
Permukaan selesai	White powder-coated plenum with natural anodized frame and clear PVC curtain option
Jenis Bersama	Bolted suspension frame with gasketed filter modules and sealed plenum flanges
Customization (Kustomisasi)	Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi.

Pilihan yang tersedia

Top-service or room-side filter accessFlexible clear curtainsLampu LED terintegrasiRemote or plenum-mounted EC fans

Planning a Ceiling-Suspended Laminar Flow Hood specification?

Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.

Bicaralah dengan tim kami