English
Португальский
Испанский язык
Японский
Индонезийский
Немецкий
Турецкий
Вьетнамский язык
Французский
Русский языкТекущий
Арабский язык
Тайский
Японский язык
Корейский
Оборудование для ламинарного потока и ограничения
Подвесный потоковый ламинарный капот
An overhead HEPA-filtered hood suspended above process equipment to create a defined downward clean-air zone without floor-mounted supports.
- Floor-Free Suspension
- Overhead HEPA Downflow
- Adjustable Hanging Height
- Optional Flexible Curtains
Введение продукции
The suspended hood mounts from the building structure above a filling point, inspection table or compact process machine. A rigid supply plenum distributes HEPA-filtered air through the lower diffuser, while adjustable threaded hangers set the operating height and maintain level. Optional clear curtains extend the protected zone without permanent walls. Structural loads, electrical routing and service clearance are coordinated above the ceiling, leaving the floor around the process accessible.
Основные характеристики
A pressure-equalizing plenum supplies the complete lower diffuser evenly.
Height-adjustable hangers accommodate equipment and ceiling variations.
Flexible clear curtains can limit cross-drafts around selected sides.
A hinged or lift-down filter panel allows service from the clean side when required.
Решения для вашего приложения
An overhead hood must deliver an even clean-air footprint while remaining structurally secure and serviceable above operating equipment.
Floor legs obstruct carts and cleaning around the process.Ceiling suspension leaves the floor perimeter open.
An uneven hanging frame tilts the airflow diffuser.Individually adjustable hangers allow the plenum to be leveled after installation.
Room cross-drafts shorten the protected downflow zone.Optional clear curtains extend from the hood edge around the critical process area.
Filter replacement conflicts with equipment below.A selected top-service or clean-side lift-down arrangement matches the available access route.
Типичные приложения
Open-vial handling zonesClean filling-point coveragePrecision assembly islandsInspection tables beneath high ceilings
Технические параметры
Typical configurable construction ranges for a ceiling-suspended laminar flow hood are listed below.
| Основной материал | Anodized aluminum plenum frame with powder-coated steel skins and aluminum honeycomb diffuser panels |
|---|---|
| Толщина панели | 40-80 mm plenum and diffuser assembly |
| эффективная ширина | 1200-3000 mm protected airflow width |
| Максимальная длина | Up to 4000 mm protected airflow length |
| Толщина линий стали | 0.8-1.2 mm powder-coated steel plenum skins |
| Плотность ядра | 30-50 kg/m³ aluminum honeycomb diffuser core |
| Теплопроводимость | 1.5-2.5 W/(m·K) across the aluminum honeycomb diffuser assembly |
| Поверхностная отделка | White powder-coated plenum with natural anodized frame and clear PVC curtain option |
| Объединенный тип | Bolted suspension frame with gasketed filter modules and sealed plenum flanges |
| Customization | Доступно в зависимости от предполагаемого применения и операционной среды. |
Доступные варианты
Top-service or room-side filter accessFlexible clear curtainsIntegrated LED lightingRemote or plenum-mounted EC fans
Planning a Ceiling-Suspended Laminar Flow Hood specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
