Anglais
Le portugais
espagnol
Le malais
Indonésien
Allemand
Le turc
Le vietnamien
FrançaisCurrent
russe
Arabe
Thaïlandais
Japonais
Coréen
Drainage de salle blanche, équipement d'hygiène et de sécurité
ZTouchless Hand Washing Sinkpar
A hands-free stainless wash basin that reduces surface contact at cleanroom gowning, hygiene and personnel-transition points.
- Hands-Free Sensor Activation
- Radiused Stainless Basin
- Concealed Utility Connections
- Cleanable Splashback Design
Introduction de produit
The touchless hand washing sink combines a formed 304 or 316L stainless basin with an electronic sensor faucet and concealed water, drain and power connections. Rounded internal corners support routine wipe-down, while the integrated splashback protects the adjacent clean wall. Sensor range and shut-off timing can be adjusted for the intended workflow, and access panels keep valves and electrical components serviceable from the technical side where the room layout permits.
Key Features
A deep radiused bowl directs splashing toward the drain and avoids sharp internal corners.
Concealed supply, solenoid and trap connections leave a simple wipe-clean exposed profile.
Wall-mounted, pedestal and multi-user configurations support different gowning-room layouts.
Des solutions pour votre application
Personnel need a reliable wash point that minimizes hand contact without creating difficult-to-clean ledges or exposed utility clutter.
Manual faucet handles can be re-contaminated immediately after washing.An infrared sensor and normally closed solenoid provide hands-free start and stop control.
Shallow bowls allow droplets to reach nearby clean walls and floors.A deep radiused basin and integrated rear splashback contain routine hand-washing spray.
Exposed valves and traps create cluttered surfaces that are slow to clean.Utilities are routed behind a removable service panel or within the wall-support assembly.
Different facilities use different water temperatures and hand-washing sequences.Optional thermostatic mixing, timed flow and soap-dispenser integration adapt the station to the operating procedure.
Les applications typiques
Salles de toilette pharmaceutiquesBiotechnology hygiene transitionsMedical-device clean areasLaboratory personnel entrances
Paramètres techniques
Typical construction ranges for a single-user stainless touchless sink are listed below; final utility and mounting details are selected for the room layout.
| Matériaux de base | AISI 304 or 316L stainless steel basin with electronic sensor faucet |
|---|---|
| Panneau épaisseur | 1.2-1.5 mm basin and splashback body |
| Largeur effective | 500-800 mm |
| Longueur maximale | Up to 1200 mm including splashback or pedestal |
| Acier face épaisseur | 1.2-1.5 mm exposed stainless surfaces |
| Densité Core | 7900-8000 kg/m³ pour les pièces structurelles en acier inoxydable |
| Conductivité thermique | 14-16 W/(m · K) pour les composants en acier inoxydable |
| surface finie | Satin brushed or electropolished cleanable stainless finish |
| Type joint | Continuously welded radiused basin with gasketed service panel and threaded utility connections |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation. |
Options disponibles
Valve de mélange thermostatiqueIntegrated touchless soap dispenserWall-mounted or pedestal supportSingle-user or multi-user basin
Vous planifiez une spécification d'évier de lavage des mains sans contact?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
