Complete touchless cleanroom hand washing sink in three-quarter view with stainless basin and sensor faucet

Peralatan Saliran Bilik Bersih, Kebersihan dan Keselamatan

Touchless Tangan Basuh Sink

A hands-free stainless wash basin that reduces surface contact at cleanroom gowning, hygiene and personnel-transition points.

Hands-Free Sensor Activation
Radiused Stainless Basin
Concealed Utility Connections
Cleanable Splashback Design

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

The touchless hand washing sink combines a formed 304 or 316L stainless basin with an electronic sensor faucet and concealed water, drain and power connections. Rounded internal corners support routine wipe-down, while the integrated splashback protects the adjacent clean wall. Sensor range and shut-off timing can be adjusted for the intended workflow, and access panels keep valves and electrical components serviceable from the technical side where the room layout permits.

Ciri-ciri Utama

Infrared activation starts water flow without requiring the operator to touch a handle.

A deep radiused bowl directs splashing toward the drain and avoids sharp internal corners.

Concealed supply, solenoid and trap connections leave a simple wipe-clean exposed profile.

Wall-mounted, pedestal and multi-user configurations support different gowning-room layouts.

Penyelesaian untuk permohonan anda

Personnel need a reliable wash point that minimizes hand contact without creating difficult-to-clean ledges or exposed utility clutter.

Manual faucet handles can be re-contaminated immediately after washing.An infrared sensor and normally closed solenoid provide hands-free start and stop control.

Shallow bowls allow droplets to reach nearby clean walls and floors.A deep radiused basin and integrated rear splashback contain routine hand-washing spray.

Exposed valves and traps create cluttered surfaces that are slow to clean.Utilities are routed behind a removable service panel or within the wall-support assembly.

Different facilities use different water temperatures and hand-washing sequences.Optional thermostatic mixing, timed flow and soap-dispenser integration adapt the station to the operating procedure.

Permohonan yang biasa

Pharmaceutical gowning roomsBiotechnology hygiene transitionsMedical-device clean areasLaboratory personnel entrances

Parameter teknikal

Typical construction ranges for a single-user stainless touchless sink are listed below; final utility and mounting details are selected for the room layout.

Bahan Teras	AISI 304 or 316L stainless steel basin with electronic sensor faucet
Ketebalan Panel	1.2-1.5 mm basin and splashback body
Lebar berkesan	500-800 mm
Panjang maksimum	Up to 1200 mm including splashback or pedestal
Keluli Menghadapi Ketebalan	1.2-1.5 mm exposed stainless surfaces
Ketumpatan teras	7900-8000 kg / m3 untuk bahagian struktur tahan karat
Kekonduksian Terma	14-16 W / (m · K) untuk komponen tahan karat
Kemasan permukaan	Satin brushed or electropolished cleanable stainless finish
Jenis Bersatu	Continuously welded radiused basin with gasketed service panel and threaded utility connections
Penyesuaian	Boleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Pilihan yang boleh didapati

Thermostatic mixing valveIntegrated touchless soap dispenserWall-mounted or pedestal supportSingle-user or multi-user basin

Planning a Touchless Hand Washing Sink specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami