STJH-LOW-PROFILE-FFU-24X36-318MM

Fan Filter Unit 24 × 36 in Low-Profile

A three-foot low-profile FFU that adds clean-air coverage without increasing cabinet height.

600 x 905 mm rectangular footprint
693 CFM maximum airflow
42 lb intermediate-size assembly

Introduction de produit

The 24 x 36 in model extends the active filter area to 5.3 ft² while retaining the same 12.375 in shallow cabinet used across the series. It reaches a published maximum airflow of 693 CFM and produces 470 CFM at a 90 FPM reference face velocity. This intermediate proportion is suited to process lanes that outgrow a square module but do not require the full length, weight or sound output of the 24 x 48 in version.

Key Features

Three-foot filter face

The extended 36 in side covers a longer workstation zone while preserving a manageable two-foot width.

Shallow family depth

A constant 318 mm cabinet height supports installation below low decks without sacrificing the larger face area.

Balanced middle duty

Its 470 CFM reference output and 64 dBA published sound point sit between the compact and full-length configurations.

Paramètres techniques

Nominal Module Size	2 x 3 ft
External Dimensions	23.63 x 35.63 x 12.375 in (600 x 905 x 318 mm)
Active Filter Area	5.3 ft²
Maximum Airflow	693 CFM
Reference Airflow	470 CFM at 90 FPM
Maximum-Airflow Power	190 W
Reference Sound Level	64 dBA at 90 FPM
Unit Weight	42 lb
Installation	Supported rectangular ceiling-grid mounting
Customisation	Disponible en fonction de l'application prévue et de l'environnement d'exploitation.

Applications

Designed for pharmaceutical support rooms, precision assembly lines and inspection bays under low roof decks. The 905 mm axis should follow the process length, with adequate long-side support and sufficient return-air capacity for the selected operating point.

Solutions for Your Application

A square FFU leaves the ends of a medium process zone outside the primary supply area.Orient the 905 mm side over the work path to extend the filtered-air footprint along the process.

The longer cabinet may load a light ceiling rail unevenly.Provide rated support along both long edges and verify the frame for the 42 lb unit before installation.

Options disponibles

Select the final filter, supply voltage, speed controller and sealing method for the project. Ceiling support and service clearance should be coordinated around the 600 x 905 mm footprint.

Planning a Fan Filter Unit 24 × 36 in Low-Profile specification?

Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.

Parlez à notre équipe