STjh compact 29 by 28 by 44 inch floor material transfer chamber with opposed roll-up doors and automatic interlock

STJH-LARGE-MATERIAL-TRANSFER-CHAMBER-29X28X44

Roll-Up Material Transfer Chamber 29 × 28 × 44 in

A compact roll-up-door chamber for tall narrow loads that exceed a wall hatch but do not need a walk-through cargo enclosure.

29 x 28 x 44 in clear chamber
Opposed roll-up doors
Compact drum and narrow-cart fit

Demander un devis. Browse les produits

Introduction de produit

The 29 x 28 x 44 in interior is the smallest fixed transfer volume in the frozen roll-up chamber table. Opposed roll-up doors avoid swing arcs, and an automatic electronic interlock controls the two sides. The 44 x 30 x 61.5 in external body mounts at floor level with stainless brackets and is supplied without an air shower in this base configuration.

Key Features

Tall-load alternative to a hatch

A 44 in internal height accommodates narrow drum carriers and stacked trays that will not fit a conventional wall box.

No door-swing envelope

Vertical roll-up panels preserve aisle space on both sides of the partition.

Electronic access sequencing

The automatic interlock blocks the opposite roll-up door during a transfer.

Paramètres techniques

Internal Dimensions	29 W x 28 D x 44 H in
External Dimensions	44 W x 30 D x 61.5 H in
Mounting	Floor-mounted with stainless support brackets
Door Arrangement	Opposed vertical roll-up doors
Door Interlock	Automatic electronic
Transfer Type	Narrow drums, tray carts and packaged components
Door Swing Clearance	Not required
Air Shower	Not included in the selected base chamber
Load Access	Floor-level transfer opening
Customisation	Disponible en fonction de l'application prévue et de l'environnement d'exploitation.

Applications

For narrow drum dollies, stacked tray carts and packaged parts crossing cleanroom boundaries in space-limited production aisles. Verify caster width, top-handle clearance and the load's turning path; the 28 in chamber depth is intended for compact loads, not personnel passage.

Solutions for Your Application

A tall drum carrier will not clear a bench-height pass box, yet a full cargo chamber is excessive.Use the 44 in high compact chamber to transfer the upright load through a smaller floor-mounted enclosure.

Swing doors would block a narrow staging aisle on one or both sides.Opposed roll-up doors store vertically and eliminate the horizontal swing path.

Options disponibles

Define door controls, status indication, safety edge, wall interface and internal shelf or guide requirements. An air-treatment package should be specified separately only when the contamination-risk assessment requires it.

Planning a Roll-Up Material Transfer Chamber 29 × 28 × 44 in specification?

Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.

Parlez à notre équipe