Pembekal Satu Henti Anda untuk Peralatan Bilik Bersih dan Kemudahan AseptikSokongan Projek Antarabangsa
Open mobile navigationClose mobile navigation
Laman Utama / Produk / Peralatan Bilik Bersih / Roll-Up Material Transfer Chamber 29 × 28 × 44 in
STJH-LARGE-MATERIAL-TRANSFER-CHAMBER-29X28X44

Roll-Up Material Transfer Chamber 29 × 28 × 44 in

A compact roll-up-door chamber for tall narrow loads that exceed a wall hatch but do not need a walk-through cargo enclosure.
  • 29 x 28 x 44 in clear chamber
  • Opposed roll-up doors
  • Compact drum and narrow-cart fit
Permintaan sebut harga Semak imbas produk

Pengenalan Produk

The 29 x 28 x 44 in interior is the smallest fixed transfer volume in the frozen roll-up chamber table. Opposed roll-up doors avoid swing arcs, and an automatic electronic interlock controls the two sides. The 44 x 30 x 61.5 in external body mounts at floor level with stainless brackets and is supplied without an air shower in this base configuration.

Ciri-ciri Utama

Tall-load alternative to a hatch

A 44 in internal height accommodates narrow drum carriers and stacked trays that will not fit a conventional wall box.

No door-swing envelope

Vertical roll-up panels preserve aisle space on both sides of the partition.

Electronic access sequencing

The automatic interlock blocks the opposite roll-up door during a transfer.

Parameter teknikal

Internal Dimensions29 W x 28 D x 44 H in
External Dimensions44 W x 30 D x 61.5 H in
MountingFloor-mounted with stainless support brackets
Door ArrangementOpposed vertical roll-up doors
Door InterlockAutomatic electronic
Transfer TypeNarrow drums, tray carts and packaged components
Door Swing ClearanceNot required
Air ShowerNot included in the selected base chamber
Load AccessFloor-level transfer opening
PenyesuaianBoleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Applications

For narrow drum dollies, stacked tray carts and packaged parts crossing cleanroom boundaries in space-limited production aisles. Verify caster width, top-handle clearance and the load's turning path; the 28 in chamber depth is intended for compact loads, not personnel passage.

Solutions for Your Application

A tall drum carrier will not clear a bench-height pass box, yet a full cargo chamber is excessive.Use the 44 in high compact chamber to transfer the upright load through a smaller floor-mounted enclosure.
Swing doors would block a narrow staging aisle on one or both sides.Opposed roll-up doors store vertically and eliminate the horizontal swing path.

Pilihan yang boleh didapati

Define door controls, status indication, safety edge, wall interface and internal shelf or guide requirements. An air-treatment package should be specified separately only when the contamination-risk assessment requires it.

Planning a Roll-Up Material Transfer Chamber 29 × 28 × 44 in specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami
Email Kami WhatsApp WeChat

Laman Utama

Produk

Berita

Tentang Kami

Hubungi Kami