STjh large floor-mount 30 by 48 by 50 inch dynamic ULPA pass box with deep stainless chamber and sanitary plinth

STJH-DYNAMIC-PASS-BOX-30X48X50-ULPA

Dynamic ULPA Pass Box 30 × 48 × 50 in Floor-Mount

A tall floor-level ULPA transfer chamber for bulk containers and large aseptic production loads.

30 x 48 x 50 in chamber
Flush-floor loading
Recirculating ULPA air system

Introduction de produit

This 30 x 48 x 50 in chamber changes the transfer method from lifted trays to floor-level bulk loading. Self-contained ULPA recirculation supports particle recovery around large containers, and 304 or 316L stainless surfaces suit controlled cleaning. Its size, door sweep and potential payload demand structural planning beyond that of a wall-hung pass box.

Key Features

Bulk-load access

Floor mounting removes the need to lift large bins to a wall-level sill.

Tall usable envelope

A 50 in internal height accepts grouped containers and production tooling.

Filtered recovery around loads

Active ULPA recirculation cleans chamber air between door operations.

Paramètres techniques

Inside Dimensions	30 W x 48 D x 50 H in
Mounting Position	Flush floor
Filtration	Self-contained recirculating ULPA
Chamber Material	304 or 316L stainless steel
Door Count	2 opposing full-height doors
Interlock	Electronic controlled sequence
Transfer Mode	Floor-loaded bins and equipment
Airflow Mode	Recirculating chamber cleanup
Installation Need	Structural base and service clearance
Customisation	Disponible en fonction de l'application prévue et de l'environnement d'exploitation.

Applications

For large aseptic production loads, grouped material bins and cleanroom tooling that cannot be lifted through a bench-height chamber. Confirm floor level, threshold design, payload mass and turning space on both sides.

Solutions for Your Application

Heavy containers cannot be safely lifted into a wall-mounted pass box.Use flush-floor loading and match the threshold to the selected trolley or handling aid.

A large load can shield chamber surfaces from recirculating air.Limit load dimensions to preserve clearance around returns and qualify recovery using the worst approved load.

Options disponibles

Specify floor reinforcement, low-profile threshold, door dimensions, 304 or 316L steel and interlock controls. Payload, trolley wheel load and cleaning method should be frozen together.

Planning a Dynamic ULPA Pass Box 30 × 48 × 50 in Floor-Mount specification?

Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.

Parlez à notre équipe