Anglais
Le portugais
espagnol
Le malais
Indonésien
Allemand
Le turc
Le vietnamien
FrançaisCurrent
russe
Arabe
Thaïlandais
Japonais
Coréen
Systèmes de contrôle des salles blanches et de surveillance environnementale
Capteur d'occupation
A low-profile ceiling or wall sensor that detects room use for lighting control, airflow setback and occupancy status without requiring user contact.
- PIR or Dual-Technology Detection
- Low-Profile Ceiling Housing
- Adjustable Time Delay
- Lighting and HVAC Outputs
Introduction de produit
The cleanroom occupancy sensor detects motion or presence using passive infrared, ultrasonic or combined technology. A smooth, low-profile housing limits exposed ledges while the optical lens covers the selected room area. Adjustable sensitivity, timeout and daylight interaction prevent brief absence from switching controlled systems too aggressively. Dry-contact, low-voltage or network output can command lighting, signal room-use status or request a defined HVAC setback mode while critical minimum ventilation remains under the primary airflow controls.
Key Features
A shallow sealed-looking enclosure suits clean ceilings and exposed cleanroom walls.
Configurable timeout avoids rapid switching during short periods of limited movement.
Separate lighting and occupancy outputs support coordinated but independent control actions.
Des solutions pour votre application
Occupancy sensing must cover the actual work area without reacting through doorways or reducing critical cleanroom ventilation below safe minimums.
A sensor turns lights off while a seated operator makes little movement.Dual-technology detection and suitable sensitivity improve presence recognition.
Movement in the corridor triggers an empty cleanroom.Coverage masking and considered mounting keep the detection field inside the intended room.
A short absence causes unnecessary airflow and lighting cycling.Adjustable delay holds the occupied state through brief departures.
An occupancy command overrides the minimum cleanroom air-change requirement.The sensor requests only a defined setback mode while minimum airflow limits remain in the HVAC controller.
Les applications typiques
Occupancy-based cleanroom lighting controlAirflow setback requestsLaboratory occupancy statusClean corridor lighting
Paramètres techniques
Typical materials and dimensions for a low-profile cleanroom occupancy sensor are shown below.
| Matériaux de base | Pyroelectric PIR element with Fresnel lens in flame-retardant polycarbonate housing |
|---|---|
| Panneau épaisseur | 30-55 mm sensor depth |
| Largeur effective | 90-140 mm sensor diameter or width |
| Longueur maximale | Up to 160 mm housing dimension |
| Acier face épaisseur | 0 mm; non-metallic ceiling or wall enclosure |
| Densité Core | 1180-1220 kg/m³ for polycarbonate housing |
| Conductivité thermique | 0.19-0.22 W/(m·K) pour le matériau du boîtier en polycarbonate |
| surface finie | Matte white low-profile housing with translucent white optical lens |
| Type joint | Twist-lock ceiling base or wall bracket with pluggable control terminal |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation. |
Options disponibles
PIR or dual-technology sensingCeiling or wall mountingDry contact or network outputDaylight hold-off input
Planning a Occupancy Sensor specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
