Englisch
Portugiesisch
Spanisch
Malaiisch
indonesisch
DeutschCurrent
Türkischer Sprache
Vietnamesisch
Französisch
Russisch
Arabisch
Thailändisch
Japanisch
Koreanisch
Reinraumsteuerung und Umweltüberwachungssysteme
Besatzungssensor
A low-profile ceiling or wall sensor that detects room use for lighting control, airflow setback and occupancy status without requiring user contact.
- PIR or Dual-Technology Detection
- Low-Profile Ceiling Housing
- Adjustable Time Delay
- Lighting and HVAC Outputs
Produkteinführung
The cleanroom occupancy sensor detects motion or presence using passive infrared, ultrasonic or combined technology. A smooth, low-profile housing limits exposed ledges while the optical lens covers the selected room area. Adjustable sensitivity, timeout and daylight interaction prevent brief absence from switching controlled systems too aggressively. Dry-contact, low-voltage or network output can command lighting, signal room-use status or request a defined HVAC setback mode while critical minimum ventilation remains under the primary airflow controls.
Key Features
A shallow sealed-looking enclosure suits clean ceilings and exposed cleanroom walls.
Configurable timeout avoids rapid switching during short periods of limited movement.
Separate lighting and occupancy outputs support coordinated but independent control actions.
Lösungen für Ihre Anwendung
Occupancy sensing must cover the actual work area without reacting through doorways or reducing critical cleanroom ventilation below safe minimums.
A sensor turns lights off while a seated operator makes little movement.Dual-technology detection and suitable sensitivity improve presence recognition.
Movement in the corridor triggers an empty cleanroom.Coverage masking and considered mounting keep the detection field inside the intended room.
A short absence causes unnecessary airflow and lighting cycling.Adjustable delay holds the occupied state through brief departures.
An occupancy command overrides the minimum cleanroom air-change requirement.The sensor requests only a defined setback mode while minimum airflow limits remain in the HVAC controller.
Typische Anwendungen
Occupancy-based cleanroom lighting controlAirflow setback requestsLaboratory occupancy statusClean corridor lighting
Technische Parameter
Typical materials and dimensions for a low-profile cleanroom occupancy sensor are shown below.
| Core Material | Pyroelectric PIR element with Fresnel lens in flame-retardant polycarbonate housing |
|---|---|
| Panel Dicke | 30-55 mm sensor depth |
| Effektive Breite | 90-140 mm sensor diameter or width |
| Maximale Länge | Up to 160 mm housing dimension |
| Stahl facing Dicke | 0 mm; non-metallic ceiling or wall enclosure |
| Kerndichte | 1180-1220 kg/m³ for polycarbonate housing |
| Thermische Leitfähigkeit | 0,19-0,22 W/(m · K) für Polycarbonat-Gehäuse material |
| Oberfläche Finish | Matte white low-profile housing with translucent white optical lens |
| Gemeinsamer Typ | Twist-lock ceiling base or wall bracket with pluggable control terminal |
| Customisierung | Verfügbar je nach beabsichtigter Anwendung und Betriebsumgebung. |
Verfügbare Optionen
PIR or dual-technology sensingCeiling or wall mountingDry contact or network outputDaylight hold-off input
Planning a Occupancy Sensor specification?
Senden Sie uns Ihre Abmessungen, Installationsbedingungen, Leistungsziele und gewünschte Oberflächenveredelung.
