Modular local clean-air workstation surrounding a process fixture

Équipement d'écoulement et de confinement laminaires

ZStation de travail Clean Airpar

Un poste modulaire à châssis ouvert qui place de l'air propre filtré au-dessus d'une étape de procédé sélectionnée, sans enfermer la zone de production environnante.

Targeted Process Coverage
Modular Open Frame
Adjustable Airflow Footprint
Equipment-Ready Work Zone

Demander un devis. Browse les produits

Introduction de produit

This workstation is configured around a specific instrument, assembly fixture or inspection step rather than a fixed clean-bench format. Fan-filter modules can be mounted above or behind the process, and clear panels or partial curtains are added only where they help control room drafts. The open frame leaves the process accessible for material loading and maintenance. Its purpose is localized non-hazardous product protection within an already managed indoor environment.

Key Features

The frame and filter position can be matched to the actual process footprint.

Open sides allow conveyors, fixtures and service access to pass through the station.

Partial panels control the most disruptive room-air directions without fully enclosing the operator.

Utility rails accept task lights, outlets and lightweight process accessories.

Independent controls allow the local airflow to operate with the process schedule.

Des solutions pour votre application

A standard bench can be the wrong shape for an installed process, while full-room upgrades may be unnecessary for one critical operation.

The process fixture cannot fit inside a conventional cabinet.An open modular frame is built around the installed equipment envelope.

Only one operation needs cleaner air than the surrounding room.Targeted fan-filter coverage concentrates clean air over that process step.

A rigid enclosure blocks maintenance access.Removable panels and open sides preserve service routes.

Air from a nearby door disrupts the local zone.A partial clear panel or curtain is placed on the identified draft side.

Les applications typiques

Localized sensor assemblyClean inspection around a test fixtureSmall conveyor transfer pointsParticle-sensitive packaging steps

Paramètres techniques

Typical configurable construction ranges for a local clean-air workstation are listed below.

Matériaux de base	Anodized aluminum modular frame with powder-coated steel filter housing and clear polycarbonate control panels
Panneau épaisseur	20-40 mm modular frame and panel sections
Largeur effective	800-2500 mm protected process width
Longueur maximale	Up to 3500 mm station length
Acier face épaisseur	0.8-1.2 mm powder-coated filter and utility housings
Densité Core	Approximately 1200 kg/m³ for solid polycarbonate side panels
Conductivité thermique	0,19 - 0,22 W / (m · K) pour les panneaux en polycarbonatepar
surface finie	Natural anodized frame, white filter housing and clear hard-coated panels
Type joint	Bolted T-slot modular frame with gasketed fan-filter mounts and removable panel clips
Customisation	Disponible en fonction de l'application prévue et de l'environnement d'exploitation.

Options disponibles

Vertical or horizontal airflowFixed or mobile framePartial curtains or rigid panelsConveyor and equipment cut-outs

Planning a Local Clean Air Workstation specification?

Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.

Parlez à notre équipe