Modular local clean-air workstation surrounding a process fixture

Laminar Flow und Containment Equipment

Lokale Clean Air Workstation

Eine modulare Station mit offenem Rahmen, die gefilterte Reinluft über einen ausgewählten Prozessschritt führt, ohne den umliegenden Produktionsbereich einzuhausen.

Targeted Process Coverage
Modular Open Frame
Adjustable Airflow Footprint
Equipment-Ready Work Zone

Bitte senden Sie eine Anfrage. Browse Produkte

Produkteinführung

This workstation is configured around a specific instrument, assembly fixture or inspection step rather than a fixed clean-bench format. Fan-filter modules can be mounted above or behind the process, and clear panels or partial curtains are added only where they help control room drafts. The open frame leaves the process accessible for material loading and maintenance. Its purpose is localized non-hazardous product protection within an already managed indoor environment.

Key Features

The frame and filter position can be matched to the actual process footprint.

Open sides allow conveyors, fixtures and service access to pass through the station.

Partial panels control the most disruptive room-air directions without fully enclosing the operator.

Utility rails accept task lights, outlets and lightweight process accessories.

Independent controls allow the local airflow to operate with the process schedule.

Lösungen für Ihre Anwendung

A standard bench can be the wrong shape for an installed process, while full-room upgrades may be unnecessary for one critical operation.

The process fixture cannot fit inside a conventional cabinet.An open modular frame is built around the installed equipment envelope.

Only one operation needs cleaner air than the surrounding room.Targeted fan-filter coverage concentrates clean air over that process step.

A rigid enclosure blocks maintenance access.Removable panels and open sides preserve service routes.

Air from a nearby door disrupts the local zone.A partial clear panel or curtain is placed on the identified draft side.

Typische Anwendungen

Localized sensor assemblyClean inspection around a test fixtureSmall conveyor transfer pointsParticle-sensitive packaging steps

Technische Parameter

Typical configurable construction ranges for a local clean-air workstation are listed below.

Core Material	Anodized aluminum modular frame with powder-coated steel filter housing and clear polycarbonate control panels
Panel Dicke	20-40 mm modular frame and panel sections
Effektive Breite	800-2500 mm protected process width
Maximale Länge	Up to 3500 mm station length
Stahl facing Dicke	0.8-1.2 mm powder-coated filter and utility housings
Kerndichte	Approximately 1200 kg/m³ for solid polycarbonate side panels
Thermische Leitfähigkeit	0.19-0.22 W/(m·K) für Polycarbonatplatten
Oberfläche Finish	Natural anodized frame, white filter housing and clear hard-coated panels
Gemeinsamer Typ	Bolted T-slot modular frame with gasketed fan-filter mounts and removable panel clips
Customisierung	Verfügbar je nach beabsichtigter Anwendung und Betriebsumgebung.

Verfügbare Optionen

Vertical or horizontal airflowFixed or mobile framePartial curtains or rigid panelsConveyor and equipment cut-outs

Planning a Local Clean Air Workstation specification?

Senden Sie uns Ihre Abmessungen, Installationsbedingungen, Leistungsziele und gewünschte Oberflächenveredelung.

Sprechen Sie mit unserem Team