Anglais
Le portugais
espagnol
Le malais
Indonésien
Allemand
Le turc
Le vietnamien
FrançaisCurrent
russe
Arabe
Thaïlandais
Japonais
Coréen
Nettoyage, désinfection et stérilisation de la salle blanche
Cleanroom Garment Stérilisateur
A vacuum-steam sterilizer configured for porous cleanroom garments and textile packs, with controlled air removal, saturated-steam exposure, drying, and barrier transfer options.
- Pulsed vacuum promotes steam penetration into porous garment packs
- Controlled drying reduces retained moisture after exposure
- Double-door options support clean-side unloading workflows
Introduction de produit
This cleanroom garment sterilizer is built for reusable coveralls, hoods, boots, and compatible porous cleanroom textiles. Chamber dimensions and loading racks are arranged to avoid over-compression, while dedicated garment recipes control conditioning and drying. Single-door and double-door barrier versions are available for pharmaceutical production and controlled laundry workflows.
Key Features
Jacketed stainless-steel chamber
Sterile filtered-air admission
Programmable post-vacuum drying
Load-specific garment racks or baskets
Automatic interlocked door system
Leak test and cycle monitoring
Electronic batch records and alarm history
Des solutions pour votre application
Dense or tightly compressed garments can trap air and moisture. Cycle performance therefore depends on breathable packaging, defined folding and loading patterns, adequate spacing, steam quality, vacuum integrity, and sufficient drying time.
How is steam penetration improved?Pulsed vacuum conditioning removes air before exposure, while validated pack density and rack spacing preserve steam access.
How is wet-load risk reduced?Heated jackets, post-vacuum drying, filtered-air breaks, and a load-specific dry phase remove retained moisture.
Can clean and non-clean sides be separated?A double-door barrier model interlocks loading and unloading doors to support one-way transfer.
How are cycles documented?Time, chamber temperature, pressure, vacuum stages, alarms, and completion state can be stored and exported.
Les applications typiques
Reusable cleanroom coverallsCleanroom hoods and bootsPorous textile packsPharmaceutical gowning operationsControlled laundry facilitiesBiotechnology production support
Paramètres techniques
The sterilizer uses a jacketed stainless chamber, vacuum pump, sterile air admission filter, condensate control, and load-specific recipes. Conditioning removes air from folded textile packs before saturated-steam exposure; post-vacuum drying and filtered-air breaks prepare the load for handling.
| Matériaux de base | 316L or 304 stainless-steel chamber with garment racks and sterile-air filter housing |
|---|---|
| Panneau épaisseur | 40–80 mm insulated cabinet panels |
| Largeur effective | 700–1300 mm equipment width |
| Longueur maximale | 1600–2800 mm maximum external dimension |
| Acier face épaisseur | 1.0-1.5mm revêtement en acier inoxydable |
| Densité Core | Isolation minérale haute température 60-100 kg/m³ |
| Conductivité thermique | 0.035-0.050 W/(m · K) |
| surface finie | Acier inoxydable externe brossé avec intérieur de la chambre polie lisse |
| Type joint | Welded chamber seams with gasketed interlocked door and sanitary filtered-air connection |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation. |
Options disponibles
Single or double interlocked doorsGarment racks and porous-load basketsGénérateur de vapeur propre intégralSterile-air filter integrity portsChariots de chargement et chariots de transfertInterface de données imprimante et réseauChamber sizes and garment recipes
Planning a Cleanroom Garment Sterilizer specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
