English
البرتغالية
الإسبانية
اللغة الملاوية
الإندونيسية
الألمانية
اللغة التركية
اللغة الفيتنامية
الفرنسية
الروسية
العربيةالحالي
التايلاندية
اليابانية
الكورية
تنظيف الغرف النظيفة والتطهير والتعقيم
غرفة نظيفة معقم الملابس
A vacuum-steam sterilizer configured for porous cleanroom garments and textile packs, with controlled air removal, saturated-steam exposure, drying, and barrier transfer options.
- Pulsed vacuum promotes steam penetration into porous garment packs
- Controlled drying reduces retained moisture after exposure
- Double-door options support clean-side unloading workflows
مقدمة المنتج
This cleanroom garment sterilizer is built for reusable coveralls, hoods, boots, and compatible porous cleanroom textiles. Chamber dimensions and loading racks are arranged to avoid over-compression, while dedicated garment recipes control conditioning and drying. Single-door and double-door barrier versions are available for pharmaceutical production and controlled laundry workflows.
الخصائص الرئيسية
Jacketed stainless-steel chamber
Sterile filtered-air admission
Programmable post-vacuum drying
Load-specific garment racks or baskets
Automatic interlocked door system
Leak test and cycle monitoring
Electronic batch records and alarm history
حلول للتطبيق الخاص بك
Dense or tightly compressed garments can trap air and moisture. Cycle performance therefore depends on breathable packaging, defined folding and loading patterns, adequate spacing, steam quality, vacuum integrity, and sufficient drying time.
How is steam penetration improved?Pulsed vacuum conditioning removes air before exposure, while validated pack density and rack spacing preserve steam access.
How is wet-load risk reduced?Heated jackets, post-vacuum drying, filtered-air breaks, and a load-specific dry phase remove retained moisture.
Can clean and non-clean sides be separated?A double-door barrier model interlocks loading and unloading doors to support one-way transfer.
How are cycles documented?Time, chamber temperature, pressure, vacuum stages, alarms, and completion state can be stored and exported.
تطبيقات نموذجية
Reusable cleanroom coverallsCleanroom hoods and bootsPorous textile packsPharmaceutical gowning operationsControlled laundry facilitiesBiotechnology production support
المعلمات الفنية
The sterilizer uses a jacketed stainless chamber, vacuum pump, sterile air admission filter, condensate control, and load-specific recipes. Conditioning removes air from folded textile packs before saturated-steam exposure; post-vacuum drying and filtered-air breaks prepare the load for handling.
| المواد الأساسية | 316L or 304 stainless-steel chamber with garment racks and sterile-air filter housing |
|---|---|
| سمك اللوحة | 40–80 mm insulated cabinet panels |
| العرض الفعال | 700–1300 mm equipment width |
| الحد الأقصى الطول | 1600–2800 mm maximum external dimension |
| الصلب يواجه سمك | 1.0–1.5 mm stainless-steel facing |
| الكثافة الأساسية | عزل معدني بدرجة حرارة عالية 60-، |
| الموصلية الحرارية | 0.035-0.050 W/(m · K) |
| إنهاء السطح | الفولاذ المقاوم للصدأ الخارجي المصقول مع غرفة داخلية ناعمة ومصقولة |
| نوع المشترك | Welded chamber seams with gasketed interlocked door and sanitary filtered-air connection |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Single or double interlocked doorsGarment racks and porous-load basketsمولد بخار نظيف متكاملSterile-air filter integrity portsLoading carts and transfer trolleysالطابعة وواجهة بيانات الشبكةChamber sizes and garment recipes
Planning a Cleanroom Garment Sterilizer specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
