Anglais
Le portugais
espagnol
Le malais
Indonésien
Allemand
Le turc
Le vietnamien
FrançaisCurrent
russe
Arabe
Thaïlandais
Japonais
Coréen
Covered liquid preparation
The vessel and dosing arrangement reduce the need to prepare each application by open manual pouring.
Equipement de décontamination du personnel et du matériel
Douche de décontamination de protection chimique
Une chambre de traitement de combinaison de protection qui dose une solution compatible dans un cycle de pulvérisation contrôlé suivi d'un rinçage séparé.
- Dosage de solution dosée
- Temps de contact contrôlé
- Circuit de rinçage séparé
- Chemistry-Matched Components
Introduction de produit
This decontamination shower combines a covered preparation vessel, dosing pump and distribution manifold for applying a selected liquid to the exterior of compatible protective suits. The treatment supply is separated from the final water-rinse branch, and the collection tray directs spent liquid to a designated outlet. The chamber and liquid-preparation equipment form distinct service areas. Pump components, seals and pipework are selected for the intended chemistry rather than assumed to share the enclosure's material.
Key Features
Separate final-rinse route
A distinct water branch allows rinsing to be scheduled after solution application instead of relying on the treatment feed alone.
Component-level material selection
Tank, pump and seal choices can reflect different chemical exposures within the same installation.
Accessible liquid equipment
Locating preparation and distribution components outside the occupied chamber supports servicing without treating them as hidden wall components.
Des solutions pour votre application
A suit-treatment process depends on the delivered liquid and the garment being treated, not the chamber material alone.
Manual dilution changes between batches.Use metered preparation with an identified batch volume, and choose a chemical-usage or concentration measurement suited to the liquid.
Folds, rear surfaces or suit connections remain outside the spray pattern.Check nozzle placement and the defined wearer position with the actual suit; adjust the arrangement instead of assuming that more spray guarantees contact everywhere.
The chosen agent attacks a seal or pump part.Assess all wetted materials at the intended concentration and temperature, including elastomers and plastics as well as stainless steel.
Spent solution cannot enter the ordinary drainage system.Provide a designated collection and transfer route sized for treatment liquid and final-rinse runoff, separate from any reuse decision.
Les applications typiques
Reusable chemical-protective suit treatment roomsChemical-process personnel exit arrangementsProtective-clothing rinse installationsLaboratory suit-cleaning areas
Use is limited to a selected suit, liquid and contaminant combination. The general configuration does not establish a BSL classification, respiratory protection, safe suit removal, sterilization or complete toxic-agent removal.
Paramètres techniques
These construction and equipment selections are reference options for a chemical protective-suit treatment chamber. Sheet gauges and material choices are not a confirmed STjh build specification or evidence of decontamination effectiveness for a particular agent.
| Treatment Format | Enclosed suit-spray chamber with separate liquid-preparation equipment |
|---|---|
| Chamber Material Option | SUS 316L stainless steel wetted enclosure surfaces |
| Enclosure Sheet Reference | 0.8–1.5 mm stainless steel sheet |
| Solution Preparation | Covered preparation tank with metering-pump feed |
| Delivery Circuit | Pump-fed treatment manifold and a separate water-rinse supply |
| Stage Sequence | Solution application, adjustable contact interval and water rinse |
| Spray Layout | Multiple treatment outlets arranged around the occupied suit position |
| Process Monitoring Options | Liquid-level indication and chemical usage or concentration monitoring |
| Configuration de la porte | Two personnel doors with interlock controls |
| Drain Collection | Chamber collection tray with a designated effluent outlet |
| Système de contrôle | PLC-controlled treatment and rinse stages with status indication |
| Service Layout | Separately accessible tank, pump, valves and liquid-distribution connections |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation. |
Options disponibles
Chemical-usage or concentration monitoringSelected tank heating packageDérapage de collecte des effluentsAlternative wetted materialsAdditional manual rinse outlet
The basic suit-treatment arrangement comprises an enclosed spray area, preparation and dosing equipment, a separate water rinse and an identified liquid outlet. Tank heating, monitoring and runoff handling are selected additions. A circulation or liquid-reuse arrangement must be specified explicitly; it is not an assumed benefit of every chemical suit shower.
Selection and Installation
Match the liquid to the suit and residue
Identify the protective-suit material, seams, visor, gloves and connected equipment before choosing a treatment liquid. Include the pump, seals, nozzles, tank and pipework in the compatibility assessment. A stainless enclosure is not resistant to every chemical, and a treatment intended for a suit exterior is not automatically suitable for exposed skin or a respirator.
Set the treatment conditions for the actual task
Specify chemical identity, working concentration, application and contact intervals, rinse requirements and the intended garment position together. Metering and timed control help deliver a selected process; they do not establish neutralization, microbial kill or removal of every contaminant. Suit folds and connections require particular attention when checking the spray pattern and process result.
Distinguish feed circulation from liquid reuse
Define whether a return line recirculates prepared solution before delivery or returns liquid collected from the chamber. These are different arrangements. Used runoff should not be assumed suitable for reuse merely because the equipment has a pump or circulation pipe. Keep the final-rinse source, backflow provisions and waste route identified separately from the treatment supply.
Reserve room for utilities and collected liquid
Allow for the occupied chamber, preparation equipment and maintenance access, not just the doorway footprint. Establish how spent solution is collected and transferred to the facility's designated waste system; the chamber drain does not treat the effluent. Ventilation and any breathing-air connection require their own selected design. Where the requirement is a water-wash stage for personnel rather than chemical application to a suit, compare the personnel decontamination shower.
Planification d'une spécification de douche de décontamination de protection chimique?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
