Anglais
Le portugais
espagnol
Le malais
Indonésien
Allemand
Le turc
Le vietnamien
FrançaisCurrent
russe
Arabe
Thaïlandais
Japonais
Coréen
Portes de salle blanche, fenêtres et systèmes de verrouillage
Porte de salle blanche en aluminium
A lightweight cleanroom doorset built from aluminum skins, an aluminum honeycomb core and precision-extruded perimeter profiles for humid rooms and frequent manual operation.
- Lightweight Aluminum Leaf
- Corrosion-Resistant Construction
- Extruded Flush Perimeter
- Anodized or Powder-Coated Finish
Introduction de produit
The Aluminum Cleanroom Door minimizes operating mass by combining thin aluminum faces with an aluminum honeycomb core. Extruded edge and frame profiles hold the leaf square while providing controlled gasket compression around the opening. The all-aluminum exterior is useful in humid interiors where unprotected carbon-steel edges could develop red rust, and the lower weight reduces stress on hinges during frequent personnel movement.
Key Features
Aluminum skins and edge profiles resist interior humidity without red rust.
Honeycomb cells stabilize the panel while keeping the door balanced.
Extruded frame grooves retain replaceable gaskets without exposed clips.
Anodized or powder-coated surfaces can match adjacent cleanroom partitions.
Des solutions pour votre application
Aluminum doors address operating weight and humidity, but must still provide a rigid leaf, clean joints and durable hardware fixing points.
Heavy metal doors become tiring during frequent manual passage.Aluminum skins and honeycomb reduce mass while retaining a full-size rigid leaf.
Carbon-steel cut edges corrode in persistently humid interiors.Aluminum perimeter construction removes exposed ferrous material from the room-side edge.
Light panels can loosen around locks and closers.Internal aluminum reinforcement plates provide solid fixing zones for concentrated hardware loads.
Loose stick-on seals detach during cleaning.Profiled gasket channels mechanically retain replaceable perimeter seals.
Les applications typiques
Humid laboratory corridorsFood preparation clean areasElectronics assembly roomsZAirlocks du personnelLight-duty healthcare clean spaces
Paramètres techniques
Typical aluminum cleanroom door construction values are provided below.
| Matériaux de base | Bonded aluminum honeycomb |
|---|---|
| Panneau épaisseur | 40-50 mm door leaf |
| Largeur effective | 800-1200 mm single-leaf clear opening |
| Longueur maximale | 2400 mm hauteur maximale de la feuille |
| Acier face épaisseur | 0 mm steel; 1.0-1.2 mm aluminum leaf skins |
| Densité Core | 40-70 kg/m³ alvéolaire en aluminium |
| Conductivité thermique | Gamme de noyau en nid d'abeille typique 0.06-0.10 W/(m · K) |
| surface finie | Satin anodized aluminum or polyester powder coating |
| Type joint | Extruded aluminum rebated frame with replaceable EPDM perimeter gasket |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation |
Options disponibles
Natural satin anodized finishPowder-coated RAL coloursFlush vision panelAutomatic drop seal
Planning a Aluminum Cleanroom Door specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
