Complete lightweight aluminum cleanroom door with extruded frame

Temiz Oda Kapıları, Pencereler ve Kilitleme Sistemleri

Alüminyum Temiz Oda Kapısı

A lightweight cleanroom doorset built from aluminum skins, an aluminum honeycomb core and precision-extruded perimeter profiles for humid rooms and frequent manual operation.

Lightweight Aluminum Leaf
Corrosion-Resistant Construction
Extruded Flush Perimeter
Anodized or Powder-Coated Finish

Alıntı isteği Browse ürünleri

Ürün tanıtımı

The Aluminum Cleanroom Door minimizes operating mass by combining thin aluminum faces with an aluminum honeycomb core. Extruded edge and frame profiles hold the leaf square while providing controlled gasket compression around the opening. The all-aluminum exterior is useful in humid interiors where unprotected carbon-steel edges could develop red rust, and the lower weight reduces stress on hinges during frequent personnel movement.

Ana Özellikler

Low leaf mass reduces opening effort and long-term hinge loading.

Aluminum skins and edge profiles resist interior humidity without red rust.

Honeycomb cells stabilize the panel while keeping the door balanced.

Extruded frame grooves retain replaceable gaskets without exposed clips.

Anodized or powder-coated surfaces can match adjacent cleanroom partitions.

Uygulamanız için çözümler

Aluminum doors address operating weight and humidity, but must still provide a rigid leaf, clean joints and durable hardware fixing points.

Heavy metal doors become tiring during frequent manual passage.Aluminum skins and honeycomb reduce mass while retaining a full-size rigid leaf.

Carbon-steel cut edges corrode in persistently humid interiors.Aluminum perimeter construction removes exposed ferrous material from the room-side edge.

Light panels can loosen around locks and closers.Internal aluminum reinforcement plates provide solid fixing zones for concentrated hardware loads.

Loose stick-on seals detach during cleaning.Profiled gasket channels mechanically retain replaceable perimeter seals.

Tipik uygulamalar

Humid laboratory corridorsFood preparation clean areasElectronics assembly roomsAirlock personeliLight-duty healthcare clean spaces

Teknik parametreler

Typical aluminum cleanroom door construction values are provided below.

Temel malzemeler	Bonded aluminum honeycomb
Panel kalınlığı	40-50 mm door leaf
Effective Width (Etkili Genişlik)	800-1200mm tek yaprak açık açılış
Maksimum uzunluk	2400 mm maksimum yaprak yüksekliği
Çelik yüz yüze kalınlığı	0 mm steel; 1.0-1.2 mm aluminum leaf skins
Core Density (Çekirdek Yoğunluğu)	40-70 kg/m³ aluminum honeycomb
Termal İletkenlik	0.06-0.10 W/(m·K) typical honeycomb core range
Yüzey bitirme	Satin anodized aluminum or polyester powder coating
Ortak tip	Extruded aluminum rebated frame with replaceable EPDM perimeter gasket
Customization (Özelleşme)	Kullanılan amaçlanan uygulama ve çalışma ortamına göre kullanılabilir

Mevcut Seçenekler

Natural satin anodized finishPowder-coated RAL coloursFlush vision panelAutomatic drop seal

Planning a Aluminum Cleanroom Door specification?

Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.

Ekibimizle konuşun