Tiếng Anh
Tiếng Đức, tiếng Đức
Tiếng Ả Rập, tiếng Ả Rập
Tiếng Pháp, tiếng Pháp
Tiếng Indonesia (tiếng Việt)
Tiếng Nhật
Tiếng Hàn / tiếng Hàn
Tiếng Mã Lai
Tiếng Bồ Đào Nha, tiếng Bồ Đào Nha
Tiếng Nga, tiếng Nga
Tiếng Tây Ban Nha, tiếng Tây Ban Nha
Tiếng Thái (tiếng Thái)
Tiếng Thổ Nhĩ Kỳ, tiếng Thổ Nhĩ Kỳ
Tiếng Việt / tiếng ViệtHiện tại
Positive fixing arrangement
The attachment depends on fasteners into a suitable base instead of only the condition of the floor's upper coating.
STJH-STAINLESS-STEEL-CLEANROOM-FLOOR-COVER-STRIP-MF35-304
Stainless Steel Cleanroom Floor Cover Strip 35 mm Mechanically Fixed 304
A wider drilled cover strip secures the floor junction with recessed mechanical fasteners.
- 35 mm cover width
- Drilled mechanical attachment
- Polished 304 stainless
About This Product
The mechanically fixed version uses a 35 mm rounded stainless face with drilled attachment positions. Flathead fasteners connect it to the supporting base, making this a distinct choice from adhesive-only trim. It is useful where the connection must remain accessible for removal or where the floor surface is unsuitable for a dependable adhesive bond, provided the substrate can safely accept the anchors.
Các tính năng chính
Removable junction cover
Accessible screws allow the strip to be lifted for work at the joint and reinstalled when the fixing locations remain sound.
Broader edge overlap
The wider face provides additional coverage over the adjoining finish edges while retaining a rounded walking profile.
Thông số kỹ thuật
| Steel Grade | AISI 304 |
|---|---|
| Cover Width | 35 mm |
| Supply Length | 2700 mm |
| Finish | Polished |
| Fixing Format | Factory-drilled |
| Fastener Head | Flathead recessed fixing |
| Profile Shape | Rounded cover |
| Installation | Surface-mounted joint bridge |
| Service Access | Removable mechanical attachment |
| Tùy chỉnh | Có sẵn dựa trên ứng dụng dự định và môi trường hoạt động. |
Applications
Use for service thresholds, clean industrial access routes and floor joints that may need later maintenance access. Check the base material and concealed services before drilling, and position the strip so that wheel traffic crosses a supported face rather than an unsupported gap.
Solutions for Your Application
An adhesive strip repeatedly detaches from a difficult floor finish.
Use mechanical attachment into a suitable supporting substrate after confirming safe fixing locations.
Raised screw heads catch cleaning tools or trolley wheels.
Use the intended flathead fasteners and seat them flush within the profile's drilled positions.
Các tùy chọn có sẵn
Specify run length, fixing substrate and required anchor arrangement. Include the frequency of removal and traffic direction so that fixing spacing and the underlying joint support suit the application.
Planning a Stainless Steel Cleanroom Floor Cover Strip 35 mm Mechanically Fixed 304 specification?
Gửi cho chúng tôi kích thước của bạn, điều kiện lắp đặt, mục tiêu hiệu suất và bề mặt yêu cầu hoàn thiện.
