English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
Positive fixing arrangement
The attachment depends on fasteners into a suitable base instead of only the condition of the floor's upper coating.
STJH-STAINLESS-STEEL-CLEANROOM-FLOOR-COVER-STRIP-MF35-304
Stainless Steel Cleanroom Floor Cover Strip 35 mm Mechanically Fixed 304
A wider drilled cover strip secures the floor junction with recessed mechanical fasteners.
- 35 mm cover width
- Drilled mechanical attachment
- Polished 304 stainless
About This Product
The mechanically fixed version uses a 35 mm rounded stainless face with drilled attachment positions. Flathead fasteners connect it to the supporting base, making this a distinct choice from adhesive-only trim. It is useful where the connection must remain accessible for removal or where the floor surface is unsuitable for a dependable adhesive bond, provided the substrate can safely accept the anchors.
الخصائص الرئيسية
Removable junction cover
Accessible screws allow the strip to be lifted for work at the joint and reinstalled when the fixing locations remain sound.
Broader edge overlap
The wider face provides additional coverage over the adjoining finish edges while retaining a rounded walking profile.
المعلمات الفنية
| Steel Grade | AISI 304 |
|---|---|
| Cover Width | 35 mm |
| Supply Length | 2700 mm |
| Finish | Polished |
| Fixing Format | Factory-drilled |
| Fastener Head | Flathead recessed fixing |
| Profile Shape | Rounded cover |
| Installation | Surface-mounted joint bridge |
| Service Access | Removable mechanical attachment |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
Applications
Use for service thresholds, clean industrial access routes and floor joints that may need later maintenance access. Check the base material and concealed services before drilling, and position the strip so that wheel traffic crosses a supported face rather than an unsupported gap.
Solutions for Your Application
An adhesive strip repeatedly detaches from a difficult floor finish.
Use mechanical attachment into a suitable supporting substrate after confirming safe fixing locations.
Raised screw heads catch cleaning tools or trolley wheels.
Use the intended flathead fasteners and seat them flush within the profile's drilled positions.
الخيارات المتاحة
Specify run length, fixing substrate and required anchor arrangement. Include the frequency of removal and traffic direction so that fixing spacing and the underlying joint support suit the application.
Planning a Stainless Steel Cleanroom Floor Cover Strip 35 mm Mechanically Fixed 304 specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
