STJH-SIDE-ACCESS-HEPA-HOUSING-CRANK

Side-Access HEPA Filter Housing Crank-Seal

A side-service HEPA cabinet with a spring-loaded crank mechanism for consistent row-wide gasket compression.

Over 700 lb row sealing force
Spring-loaded crank action
Hinged dual-access doors

Giới thiệu Sản phẩm

The defining feature of this housing is its spring-loaded crank mechanism, which applies more than 700 lb of sealing force across each filter row. That centralized action helps produce consistent gasket compression and simplifies release compared with tightening multiple independent fasteners. The 14-gauge galvanized cabinet includes hinged dual-access doors and a nominal 2 in prefilter track for final-filter protection.

Các tính năng chính

Uniform row compression

The crank transfers controlled mechanical force across the installed filter rather than relying on hand-tightened points.

Fast service release

One operating mechanism disengages the filter row for withdrawal through the side door.

Protected final stage

A shallow prefilter track captures coarse loading before it reaches the HEPA element.

Thông số kỹ thuật

Housing Material	14-gauge galvanized steel
Sealing Mechanism	Spring-loaded crank
Sealing Force	More than 700 lb per filter row
Access	Hinged dual-access doors
Prefilter Track	2 in nominal
Filter Seal	Gasket compression
Operation	Side-mounted crank actuation
Primary Filter	Full-size HEPA or ULPA element as selected
Service Requirement	Crank and spring inspection during filter change
Tùy chỉnh	Có sẵn dựa trên ứng dụng dự định và môi trường hoạt động.

Applications

For HEPA or ULPA installations where repeatable gasket loading, quick side service and reliable clamping force are priorities.

Solutions for Your Application

Uneven manual tightening leaves a leak path around one corner of the filter.Use the spring-loaded crank to distribute the documented row force and verify seal integrity after installation.

The crank cannot be operated because pipework blocks its sweep.Show the handle path and service clearance on the coordination drawing before locating adjacent utilities.

Các tùy chọn có sẵn

Specify filter size and depth, cabinet finish, crank side, prefilter, door handing, test ports, gasket material and duct flanges.

Planning a Side-Access HEPA Filter Housing Crank-Seal specification?

Gửi cho chúng tôi kích thước của bạn, điều kiện lắp đặt, mục tiêu hiệu suất và bề mặt yêu cầu hoàn thiện.

Nói chuyện với đội ngũ của chúng tôi