STjh medium 30 inch refrigerated stainless pass box with broad insulated door and condenser grille

STJH-REFRIGERATED-PASS-BOX-30X30X30

Refrigerated Cleanroom Pass Box 30 × 30 × 30 in

A medium cubic refrigerated chamber that adds cold-transfer capacity while keeping a flush-wall loading height for manual material handling.

30 in medium cubic volume
Flush-wall refrigerated transfer
304 or 316 stainless construction

Yêu cầu báo giá Duyệt các sản phẩm

Giới thiệu Sản phẩm

With a 30 x 30 x 30 in interior, this model offers nearly twice the cubic volume of the 24 in chamber while retaining flush-wall installation. The refrigerated pass box uses programmable closed-loop cooling, internal air circulation and insulated continuous-seam stainless construction. It is intended for pharmacy and biotechnology totes that need greater capacity but do not require a floor-level cart opening.

Các tính năng chính

Larger manual-load capacity

The 30 in cube accepts multi-pack totes and laboratory racks that crowd the compact 24 in chamber.

Flush cleanroom interface

Wall mounting minimizes projecting ledges around the clean-side opening and keeps the chamber at ergonomic loading height.

Programmed temperature operation

The cooling controls regulate the chamber down to the published 5°C setpoint basis with cycling hysteresis.

Thông số kỹ thuật

Internal Size	30 W x 30 D x 30 H in
External Size	38 W x 30 D x 54 H in
Installation	Flush wall
Lowest Cited Setpoint	5°C
Refrigeration	Closed-loop 1050 BTU module
Control Logic	Programmable cooling with 5°C hysteresis
Chamber Material	304 or 316 stainless steel
Thermal Insulation	0.5 in polyurethane foam
Power Supply	120 V
Tùy chỉnh	Có sẵn dựa trên ứng dụng dự định và môi trường hoạt động.

Applications

For pharmacy preparation materials, biotechnology packs and controlled laboratory batches requiring a short refrigerated transfer hold. Confirm shelf spacing, pack airflow and heat load; filling the cube tightly can reduce air circulation and extend recovery after loading.

Solutions for Your Application

A 24 in chamber cannot hold the scheduled tote quantity without stacking against the circulation outlet.Use the 30 in cube to increase volume and preserve an air gap around the cold-transfer load.

A larger floor-level unit would require carts even though all loads are manually handled.Retain flush-wall mounting to keep the receiving height practical for hand-loaded pharmacy and laboratory containers.

Các tùy chọn có sẵn

Select stainless grade, removable shelves, access control and temperature or humidity display. Specify alarm contacts, condensate routing and the acceptable warm-up interval during sanitation and maintenance.

Planning a Refrigerated Cleanroom Pass Box 30 × 30 × 30 in specification?

Gửi cho chúng tôi kích thước của bạn, điều kiện lắp đặt, mục tiêu hiệu suất và bề mặt yêu cầu hoàn thiện.

Nói chuyện với đội ngũ của chúng tôi