STjh medium 30 inch refrigerated stainless pass box with broad insulated door and condenser grille

STJH-REFRIGERATED-PASS-BOX-30X30X30

Refrigerated Cleanroom Pass Box 30 × 30 × 30 in

A medium cubic refrigerated chamber that adds cold-transfer capacity while keeping a flush-wall loading height for manual material handling.

30 in medium cubic volume
Flush-wall refrigerated transfer
304 or 316 stainless construction

견적 요청 제품 찾아보기

상품 소개

With a 30 x 30 x 30 in interior, this model offers nearly twice the cubic volume of the 24 in chamber while retaining flush-wall installation. The refrigerated pass box uses programmable closed-loop cooling, internal air circulation and insulated continuous-seam stainless construction. It is intended for pharmacy and biotechnology totes that need greater capacity but do not require a floor-level cart opening.

주요 기능

Larger manual-load capacity

The 30 in cube accepts multi-pack totes and laboratory racks that crowd the compact 24 in chamber.

Flush cleanroom interface

Wall mounting minimizes projecting ledges around the clean-side opening and keeps the chamber at ergonomic loading height.

Programmed temperature operation

The cooling controls regulate the chamber down to the published 5°C setpoint basis with cycling hysteresis.

기술 매개변수

Internal Size	30 W x 30 D x 30 H in
External Size	38 W x 30 D x 54 H in
Installation	Flush wall
Lowest Cited Setpoint	5°C
Refrigeration	Closed-loop 1050 BTU module
Control Logic	Programmable cooling with 5°C hysteresis
Chamber Material	304 or 316 stainless steel
Thermal Insulation	0.5 in polyurethane foam
Power Supply	120 V
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

Applications

For pharmacy preparation materials, biotechnology packs and controlled laboratory batches requiring a short refrigerated transfer hold. Confirm shelf spacing, pack airflow and heat load; filling the cube tightly can reduce air circulation and extend recovery after loading.

Solutions for Your Application

A 24 in chamber cannot hold the scheduled tote quantity without stacking against the circulation outlet.Use the 30 in cube to increase volume and preserve an air gap around the cold-transfer load.

A larger floor-level unit would require carts even though all loads are manually handled.Retain flush-wall mounting to keep the receiving height practical for hand-loaded pharmacy and laboratory containers.

사용 가능한 옵션

Select stainless grade, removable shelves, access control and temperature or humidity display. Specify alarm contacts, condensate routing and the acceptable warm-up interval during sanitation and maintenance.

Planning a Refrigerated Cleanroom Pass Box 30 × 30 × 30 in specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.