Tiếng Anh
Tiếng Đức, tiếng Đức
Tiếng Ả Rập, tiếng Ả Rập
Tiếng Pháp, tiếng Pháp
Tiếng Indonesia (tiếng Việt)
Tiếng Nhật
Tiếng Hàn / tiếng Hàn
Tiếng Mã Lai
Tiếng Bồ Đào Nha, tiếng Bồ Đào Nha
Tiếng Nga, tiếng Nga
Tiếng Tây Ban Nha, tiếng Tây Ban Nha
Tiếng Thái (tiếng Thái)
Tiếng Thổ Nhĩ Kỳ, tiếng Thổ Nhĩ Kỳ
Tiếng Việt / tiếng ViệtHiện tại
Uniform material through the section
Wear exposes the same basic material composition beneath the surface, avoiding a thin decorative film as the sole visual and functional wearing component.
STJH-HOMOGENEOUS-PVC-SHEET-FLOORING-CR20
Homogeneous PVC Sheet Flooring ISO 5
A compact homogeneous sheet option for projects selecting resilient flooring for an ISO 5 cleanroom environment.
- Full-depth homogeneous PVC body
- 2 mm compact sheet construction
- Heat-welded seam layout
About This Product
This configuration uses a single homogeneous PVC body rather than a separate printed film over a backing layer. The full 2 mm section provides the wear material, and adjoining sheets are heat welded after bonding. Its role is a cleanable, continuous floor finish within a controlled room. The room's airborne cleanliness also depends on ventilation, operations and the complete installed envelope.
Các tính năng chính
Few transverse interruptions
The 2 m roll width allows long coverage strips. Carefully locating joins away from concentrated turning points supports a practical layout for cleanroom traffic.
Cleanable room junctions
Coved transitions and sealed details around penetrations keep floor-to-wall interfaces accessible to cleaning equipment and reduce difficult square corners beside fixed furniture.
Thông số kỹ thuật
| Material | Homogeneous PVC |
|---|---|
| Nominal Thickness | 2 mm |
| Wear Construction | Full-depth wear body |
| Roll Width | 2,000 mm |
| Backing Type | Compact, without foam cushion |
| Seam Method | Heat-welded PVC joints |
| Installation | Full-surface adhesive bonding |
| Perimeter Detail | Coved or sealed wall junction |
| Surface Form | Smooth resilient sheet |
| Tùy chỉnh | Có sẵn dựa trên ứng dụng dự định và môi trường hoạt động. |
Applications
A selection option for pharmaceutical and medical-device projects evaluating resilient finishes for ISO 5 rooms. The designation describes the intended project context, not certification of an STJH installation. Match the finish to the room's cleaning chemistry, traffic pattern and required qualification procedure alongside its air-handling design.
Solutions for Your Application
Debris collects in a dense network of small floor joints.
Use long sheet runs and locate heat-welded seams with a deliberate layout around doors, benches and equipment bases.
A floor is selected using room class alone.
Assess particle behaviour, cleaning methods and seam integrity as part of the complete floor selection rather than relying on the room-class label.
Các tùy chọn có sẵn
Choose the colour, roll layout, compatible adhesive and welded cove arrangement. Include transition details at resin floors and access hatches so different construction types meet with cleanable edges.
Planning a Homogeneous PVC Sheet Flooring ISO 5 specification?
Gửi cho chúng tôi kích thước của bạn, điều kiện lắp đặt, mục tiêu hiệu suất và bề mặt yêu cầu hoàn thiện.
