Englisch
DeutschCurrent
Arabisch
Französisch
indonesisch
Japanisch
Koreanisch
Malaiisch
Portugiesisch
Russisch
Spanisch
Thailändisch
Türkischer Sprache
Vietnamesisch
Uniform material through the section
Wear exposes the same basic material composition beneath the surface, avoiding a thin decorative film as the sole visual and functional wearing component.
STJH-HOMOGENEOUS-PVC-SHEET-FLOORING-CR20
Homogeneous PVC Sheet Flooring ISO 5
A compact homogeneous sheet option for projects selecting resilient flooring for an ISO 5 cleanroom environment.
- Full-depth homogeneous PVC body
- 2 mm compact sheet construction
- Heat-welded seam layout
About This Product
This configuration uses a single homogeneous PVC body rather than a separate printed film over a backing layer. The full 2 mm section provides the wear material, and adjoining sheets are heat welded after bonding. Its role is a cleanable, continuous floor finish within a controlled room. The room's airborne cleanliness also depends on ventilation, operations and the complete installed envelope.
Key Features
Few transverse interruptions
The 2 m roll width allows long coverage strips. Carefully locating joins away from concentrated turning points supports a practical layout for cleanroom traffic.
Cleanable room junctions
Coved transitions and sealed details around penetrations keep floor-to-wall interfaces accessible to cleaning equipment and reduce difficult square corners beside fixed furniture.
Technische Parameter
| Material | Homogeneous PVC |
|---|---|
| Nominal Thickness | 2 mm |
| Wear Construction | Full-depth wear body |
| Roll Width | 2,000 mm |
| Backing Type | Compact, without foam cushion |
| Seam Method | Heat-welded PVC joints |
| Installation | Full-surface adhesive bonding |
| Perimeter Detail | Coved or sealed wall junction |
| Surface Form | Smooth resilient sheet |
| Customisierung | Verfügbar je nach beabsichtigter Anwendung und Betriebsumgebung. |
Applications
A selection option for pharmaceutical and medical-device projects evaluating resilient finishes for ISO 5 rooms. The designation describes the intended project context, not certification of an STJH installation. Match the finish to the room's cleaning chemistry, traffic pattern and required qualification procedure alongside its air-handling design.
Solutions for Your Application
Debris collects in a dense network of small floor joints.
Use long sheet runs and locate heat-welded seams with a deliberate layout around doors, benches and equipment bases.
A floor is selected using room class alone.
Assess particle behaviour, cleaning methods and seam integrity as part of the complete floor selection rather than relying on the room-class label.
Verfügbare Optionen
Choose the colour, roll layout, compatible adhesive and welded cove arrangement. Include transition details at resin floors and access hatches so different construction types meet with cleanable edges.
Planning a Homogeneous PVC Sheet Flooring ISO 5 specification?
Senden Sie uns Ihre Abmessungen, Installationsbedingungen, Leistungsziele und gewünschte Oberflächenveredelung.
