STjh 610 mm U17 gel-seal ULPA filter main product view

STJH-GEL-SEAL-ULPA-U17-610

Gel-Seal ULPA Filter 610 mm U17 ePTFE

A 610 mm U17 membrane terminal with positive gel engagement for the most contamination-sensitive process coverage.

U17 maximum efficiency
610 mm ceiling coverage
Positive reverse gel seal

Giới thiệu Sản phẩm

This full-module panel pairs the highest U17 efficiency in the series with a reverse gel interface and 35 mm boron-free ePTFE pack. It is meant for critical process zones where the reduction in particle penetration outweighs higher system resistance. Because the external face remains similar to lower grades, purchasing records should state U17 acceptance, gel orientation and test airflow unambiguously.

Các tính năng chính

Critical-zone particle barrier

U17 efficiency targets the most sensitive semiconductor operations rather than general cleanroom coverage.

Continuous fluid interface

The reverse gel trough surrounds the full face and supports repeatable blade engagement in a compatible grid.

Robust membrane support

Spunbond layers on both sides of the ePTFE membrane help protect the high-grade pack from handling stress.

Thông số kỹ thuật

Nominal Face Size	About 610 x 610 mm
Efficiency Class	U17
Minimum Efficiency	99.999995% at MPPS
Filter Media	Boron-free supported ePTFE
Media Pack Depth	35 mm
Frame Material	Anodized aluminum
Seal Type	Reverse gel channel
Nominal Initial Resistance	0.55 in. w.g. at 100 fpm
Loading Method	Compatible room-side gel grid
Tùy chỉnh	Có sẵn dựa trên ứng dụng dự định và môi trường hoạt động.

Applications

Applied locally in leading-edge semiconductor process bays, tool mini-environments and critical metrology spaces where U17 is explicitly required. It should be integrated with sufficient fan reserve and a grid designed for the reverse gel configuration.

Solutions for Your Application

U17 panels are mixed with lower grades because the frames look alike.Use unique receiving inspection records tied to model code, efficiency label, seal side and ceiling location before unpacking.

The ceiling fan cannot recover design flow after the U17 changeout.Budget for the 0.55 in. w.g. clean resistance at 100 fpm and reserve U17 coverage for zones that truly need it.

Các tùy chọn có sẵn

Specify finished dimensions, overall frame series, gel location, faceguard material, divider or test ports and required airflow test point.

Planning a Gel-Seal ULPA Filter 610 mm U17 ePTFE specification?

Gửi cho chúng tôi kích thước của bạn, điều kiện lắp đặt, mục tiêu hiệu suất và bề mặt yêu cầu hoàn thiện.

Nói chuyện với đội ngũ của chúng tôi