STjh 30 kW fan-forced electric air heater with a large housing and broad finned heating assembly on white.

STJH-FINNED-TUBULAR-ELECTRIC-AIR-HEATER-30KW

Finned-Tubular Electric Air Heater 30 kW Fan-Forced

A high-output 30 kW fan-forced heater with 38 A total current and an approximate 79 F discharge-air temperature rise.

30 kW heating output
38 A total current
Approximately 79 F air rise

Giới thiệu Sản phẩm

This largest fixed assembly doubles the medium heater's output to 30 kW while using a larger fan-forced housing. The documented 38 A current and approximately 79 F temperature rise suit high-heat-loss clean utility and mechanical support areas.

Các tính năng chính

High support-space output

The large element bank addresses substantial ventilation or envelope heat loss.

Concentrated warm-air delivery

The fan-forced cabinet projects heat into a larger utility area rather than relying on passive convection.

Heavy electrical duty

The published 38 A load makes power and protective coordination explicit for the high-capacity assembly.

Thông số kỹ thuật

Heating Capacity	30 kW
Power Supply	480 V, three phase
Total Current	38 A
Fan Motor	1/4 hp
Approximate Air Rise	79 F / 44 C
Elements	Stainless finned tubular
Air Delivery	Large fan-forced housing
Safety Control	High-limit and fan interlock options
Installation	Large utility or mechanical support area
Tùy chỉnh	Heating stages, control voltage and mounting arrangement can be configured for the intended application and operating environment.

Applications

Large clean utility rooms, high-heat-loss mechanical spaces, process-support areas and equipment freeze protection.

Solutions for Your Application

The medium heater cannot recover room temperature after a large door opening or ventilation event.Use the 30 kW output with staged or thermostatic control matched to the calculated heat loss.

The high discharge-temperature rise could overheat nearby materials.Maintain manufacturer-based clearance and aim the fan discharge into an open circulation path.

Các tùy chọn có sẵn

Staged heat, thermostat, remote control, disconnect, fan delay, high-limit controls, mounting hardware and enclosure finish can be selected.

Planning a Finned-Tubular Electric Air Heater 30 kW Fan-Forced specification?

Gửi cho chúng tôi kích thước của bạn, điều kiện lắp đặt, mục tiêu hiệu suất và bề mặt yêu cầu hoàn thiện.

Nói chuyện với đội ngũ của chúng tôi