STJH-EXHAUST-HEPA-H14-BIBO

Exhaust HEPA Filter H14 BIBO

A stainless H14 cell equipped for controlled removal through a compatible bag-in/bag-out exhaust housing.

Bag-in/bag-out change method
H14 containment exhaust
Stainless sealed frame

Giới thiệu Sản phẩm

The defining requirement for this H14 model is its changeout interface, not simply its efficiency. A sealed stainless frame can be supplied with the gel or gasket arrangement and extraction features expected by a bag-in/bag-out housing, allowing the spent cell to be transferred into a barrier bag. Filter and housing must be treated as one containment system; a BIBO label cannot make an unmatched cell safe to remove.

Các tính năng chính

Controlled service boundary

Compatible extraction features allow the housing mechanism to move the loaded filter into a PVC change bag while maintaining a barrier.

Seal-interface flexibility

Gel or gasket variants can be chosen to match the positive-seal hardware already installed in the containment bank.

Rugged handling enclosure

Stainless construction protects the media pack during deliberate extraction, bagging and replacement operations.

Thông số kỹ thuật

Efficiency Class	H14
Filter Media	Microglass
Frame Material	Stainless steel
Seal Selection	Gel or gasket to suit the containment housing
Change Method	Bag-in/bag-out
Extraction Provision	Compatible clips or handling feature as specified
Housing Access	Side-access containment housing
Barrier Bag Interface	Compatible PVC change-bag system
Primary Duty	Hazardous exhaust particulate containment
Tùy chỉnh	Có sẵn dựa trên ứng dụng dự định và môi trường hoạt động.

Applications

Intended for biosafety, potent-compound pharmaceutical, radioactive or other hazardous exhaust trains where a validated BIBO housing and site procedure protect maintenance personnel. Hazard characterization, decontamination and waste handling remain facility responsibilities beyond the filter element.

Solutions for Your Application

A standard H14 cell lacks the features needed to withdraw it inside the change bag.Specify the housing make, seal interface, extraction direction and required clips so the filter can be manipulated by the installed safe-change mechanism.

The replacement cell could be rotated so its gasket or gel faces the wrong side.Mark airflow and seal orientation clearly, then verify them against the housing procedure before the old barrier is opened.

Các tùy chọn có sẵn

Confirm face and depth dimensions, upstream or downstream seal, gel versus gasket, extraction clips, faceguards and BIBO housing compatibility.

Planning a Exhaust HEPA Filter H14 BIBO specification?

Gửi cho chúng tôi kích thước của bạn, điều kiện lắp đặt, mục tiêu hiệu suất và bề mặt yêu cầu hoàn thiện.

Nói chuyện với đội ngũ của chúng tôi