Tiếng Anh
Tiếng Đức, tiếng Đức
Tiếng Ả Rập, tiếng Ả Rập
Tiếng Pháp, tiếng Pháp
Tiếng Indonesia (tiếng Việt)
Tiếng Nhật
Tiếng Hàn / tiếng Hàn
Tiếng Mã Lai
Tiếng Bồ Đào Nha, tiếng Bồ Đào Nha
Tiếng Nga, tiếng Nga
Tiếng Tây Ban Nha, tiếng Tây Ban Nha
Tiếng Thái (tiếng Thái)
Tiếng Thổ Nhĩ Kỳ, tiếng Thổ Nhĩ Kỳ
Tiếng Việt / tiếng ViệtHiện tại
Integrated distribution layer
The backing contributes to lateral electrical continuity beneath the wearing body. Grounding connections must remain effective at room boundaries, columns and separate sheet areas.
STJH-ELECTROSTATIC-CONDUCTIVE-PVC-FLOORING-CB20
Electrostatic-Conductive PVC Flooring Carbon-Backed Sheet
A conductive sheet combining carbon-black chips with a distinct black backing layer for ESD floor construction.
- Carbon-black chips in homogeneous vinyl
- Distinct black conductive backing
- Approximately 2 m wide roll coverage
About This Product
This configuration separates its electrical pathway from a conventional plain vinyl construction by incorporating carbon-black chips and a conductive backing. The 2 mm sheet provides broad roll coverage while the backing distributes charge toward the designed earthing connections. Its reference installation permits an appropriate standard adhesive system; that detail does not remove the need for specified grounding points or whole-floor electrical testing.
Các tính năng chính
Continuous visible floor field
Sheet installation suits large bays where a high number of tile edges would complicate cleaning routes and increase the number of exposed joints.
Matt maintenance face
The treated surface supports daily cleaning without adding an insulating polish layer. Soil and inappropriate coatings can change the electrical contact experienced by footwear.
Thông số kỹ thuật
| Material | Homogeneous conductive PVC |
|---|---|
| Thickness | 2 mm |
| Conductive Inclusion | Carbon-black chips |
| Backing | Black conductive layer |
| Reference Roll Width | 2,000 mm |
| Reference Roll Length | Approximately 26,000 mm |
| Kết thúc bề mặt | Factory-treated matt face |
| Bonding Method | Compatible adhesive system for conductive-backed sheet |
| Grounding | Integrated earthing strips and connections |
| Tùy chỉnh | Có sẵn dựa trên ứng dụng dự định và môi trường hoạt động. |
Applications
Use in electronics rooms, instrument laboratories and imaging support areas requiring a conductive sheet floor. The electrical system includes the floor, adhesive arrangement, earthing and any ESD footwear used by personnel. Keep maintenance staff informed about approved cleaners so a later coating does not interrupt the intended conductive path.
Solutions for Your Application
A conventional adhesive is assumed to make grounding unnecessary.
Retain the designed earthing arrangement and verify resistance after installation; the conductive backing only changes how the floor's path is formed.
Electrical performance changes after a maintenance treatment.
Avoid insulating surface films and check the cleaned floor using the same electrical acceptance procedure used for the operating area.
Các tùy chọn có sẵn
Select roll colours, grounding layout and compatible seam treatment. Define electrical acceptance with the intended footwear and maintenance regime, especially where a floor area is separated by movement joints or doors.
Planning a Electrostatic-Conductive PVC Flooring Carbon-Backed Sheet specification?
Gửi cho chúng tôi kích thước của bạn, điều kiện lắp đặt, mục tiêu hiệu suất và bề mặt yêu cầu hoàn thiện.
