Tiếng Anh
Tiếng Đức, tiếng Đức
Tiếng Ả Rập, tiếng Ả Rập
Tiếng Pháp, tiếng Pháp
Tiếng Indonesia (tiếng Việt)
Tiếng Nhật
Tiếng Hàn / tiếng Hàn
Tiếng Mã Lai
Tiếng Bồ Đào Nha, tiếng Bồ Đào Nha
Tiếng Nga, tiếng Nga
Tiếng Tây Ban Nha, tiếng Tây Ban Nha
Tiếng Thái (tiếng Thái)
Tiếng Thổ Nhĩ Kỳ, tiếng Thổ Nhĩ Kỳ
Tiếng Việt / tiếng ViệtHiện tại
No intentional ventilation openings
The closed face suits locations where air should pass through designated neighbouring panels instead of directly beneath a process-tool footprint or equipment base.
STJH-DIE-CAST-ALUMINUM-RAISED-ACCESS-FLOOR-SP60
Die-Cast Aluminum Raised Access Floor Solid
A solid die-cast aluminum module for equipment positions where the floor should not provide ventilation openings.
- Solid aluminum walking face
- Orthotropic die-cast structure
- 600 mm cleanroom floor grid
About This Product
This 600 mm grid panel uses a solid die-cast aluminum body with orthotropic structural geometry beneath the walking face. The construction directs material into supporting ribs while keeping the top free from airflow perforations. It is selected for cleanroom equipment locations that need accessible underfloor services and a continuous floor surface, with panel thickness in the 52–60 mm reference range.
Các tính năng chính
Ribbed structural underside
The cast support geometry provides a defined load path to the pedestal system. Equipment feet and service openings need to be considered against that structure.
Material-focused cleanroom selection
Aluminum offers a non-magnetic panel body without a wood or cement-filled core. The selected surface finish should match cleaning and electrical requirements.
Thông số kỹ thuật
| Panel Grid | 600 x 600 mm |
|---|---|
| Độ dày bảng điều khiển | 52–60 mm |
| Panel Material | Die-cast aluminum |
| Structural Form | Orthotropic ribbed body |
| Top Geometry | Solid, unperforated |
| Reference System Weight | 27–42 kg/m² |
| Pedestal Height Range | 50–2,000 mm |
| Surface Options | Conductive coating or suitable resilient finish |
| Access Method | Individually removable modules |
| Tùy chỉnh | Có sẵn dựa trên ứng dụng dự định và môi trường hoạt động. |
Applications
Use around semiconductor tools and clean technical equipment where a solid floor is required alongside ventilating modules. The support structure, panel variant and tool load distribution determine the installation's usable capacity. Plan future service openings before manufacture so they do not remove critical rib sections or leave an unsupported panel edge.
Solutions for Your Application
Ventilated panels deliver air beneath a location intended to remain closed.
Use the solid module there and concentrate airflow through separately selected ventilation panels in the room layout.
Equipment feet concentrate load between panel supports.
Match the panel and understructure to the actual foot positions and provide dedicated support where the tool layout requires it.
Các tùy chọn có sẵn
Select the panel depth, finish and support height. Coordinate electrical bonding and service penetrations with the equipment plan, and use compatible lifting tools to maintain the finished surface during access work.
Planning a Die-Cast Aluminum Raised Access Floor Solid specification?
Gửi cho chúng tôi kích thước của bạn, điều kiện lắp đặt, mục tiêu hiệu suất và bề mặt yêu cầu hoàn thiện.
