Tiếng Anh
Tiếng Đức, tiếng Đức
Tiếng Ả Rập, tiếng Ả Rập
Tiếng Pháp, tiếng Pháp
Tiếng Indonesia (tiếng Việt)
Tiếng Nhật
Tiếng Hàn / tiếng Hàn
Tiếng Mã Lai
Tiếng Bồ Đào Nha, tiếng Bồ Đào Nha
Tiếng Nga, tiếng Nga
Tiếng Tây Ban Nha, tiếng Tây Ban Nha
Tiếng Thái (tiếng Thái)
Tiếng Thổ Nhĩ Kỳ, tiếng Thổ Nhĩ Kỳ
Tiếng Việt / tiếng ViệtHiện tại
Conductive aggregate architecture
The mineral broadcast is part of the complete system and must work with the resin layers, rather than being substituted with ordinary decorative sand.
STJH-CONDUCTIVE-EPOXY-FLOORING-CH25
Conductive Epoxy Flooring Chemical-Resistant Broadcast
A conductive resin system with a silicon-carbide traction layer for combined chemical and mechanical exposure.
- 2.0-2.5 mm composite construction
- 0.5-1.0 mm silicon-carbide broadcast
- Chemical-resistant final coating
About This Product
CH25 includes earthing, conductive primer, conductive epoxy base, a silicon-carbide broadcast and a final chemical-resistant coating. The approximately 2.0-2.5 mm construction creates a granular face above a coordinated electrical pathway. This is a thicker aggregate-based floor than textured roller-applied ESD coatings, intended for process areas where chemical splash, foot traffic and wheeled movement occur together.
Các tính năng chính
Traction under process traffic
A sealed granular profile offers a different contact surface from smooth conductive epoxy, useful where controlled grip is needed.
Defined chemical-contact face
The final coat is selected for the substances that may reach the floor, with exposure time and cleaning considered together.
Thông số kỹ thuật
| Resin System | Conductive epoxy multilayer |
|---|---|
| Nominal Thickness | 2.0-2.5 mm |
| Broadcast | Silicon carbide |
| Aggregate Size | 0.5-1.0 mm |
| Underlayers | Epoxy primer and conductive primer |
| Topcoat | Chemical-resistant epoxy |
| Surface | Broadcast semi-gloss |
| Grounding | Earthing connections within system |
| Application Temperature | 10-30 °C |
| Tùy chỉnh | Có sẵn dựa trên ứng dụng dự định và môi trường hoạt động. |
Applications
Suitable for chemical-handling production rooms, battery process support and pharmaceutical utility areas requiring conductivity and traction. Select the floor against actual chemical concentration, temperature and contact duration. Drainage and cleanup practices remain necessary even with a chemically resistant wearing face.
Solutions for Your Application
Ordinary broadcast sand could interrupt the intended electrical construction.
Retain the specified conductive-compatible aggregate and complete layer sequence.
A smooth conductive coating does not suit the traffic conditions.
Use the sealed silicon-carbide profile while matching cleaning equipment to its texture.
Các tùy chọn có sẵn
Choose colour and cove geometry, and plan earthing locations before the base is covered. Keep the aggregate grading and final coat compatible rather than varying the ingredients independently.
Planning a Conductive Epoxy Flooring Chemical-Resistant Broadcast specification?
Gửi cho chúng tôi kích thước của bạn, điều kiện lắp đặt, mục tiêu hiệu suất và bề mặt yêu cầu hoàn thiện.
