Small integrated ventilation package
Supply, extract, filtration and energy recovery are combined for a single controlled zone or support room.
This compact side-connected unit uses the smallest selected cabinet, approximately 1597 x 1531 x 730 mm, and a documented 720 m3/h selection point. It integrates separate supply and extract fans, filtration and counterflow recovery for a small controlled zone while keeping duct connections on the cabinet sides.
Supply, extract, filtration and energy recovery are combined for a single controlled zone or support room.
Connections on the cabinet sides suit plant rooms where end clearance is limited or ducts run laterally.
The 720 m3/h operating point allows a smaller heater selection than the two higher-capacity compact models.
| Reference Airflow | 720 m3/h |
|---|---|
| Cabinet Dimensions | Approximately 1597 x 1531 x 730 mm |
| Equipment Weight | Approximately 280 kg |
| Heat Exchanger | Counterflow plate type |
| Air Paths | Balanced supply and extract |
| Fan Arrangement | Separate direct-drive fans |
| Heating Option | Electric or water coil sized to duty |
| Filtration | Supply and extract filter stages |
| Connections | Side-connected cabinet |
| Tùy chỉnh | Heating, filtration and duct orientation can be configured for the intended application and operating environment. |
Small controlled production zones, clean support rooms, laboratories and compact mechanical rooms needing balanced heat-recovery ventilation.
Electric or water heating, filter grades, frost protection, fan-speed control, humidity or temperature sensors and connection orientation are selectable.
Gửi cho chúng tôi kích thước của bạn, điều kiện lắp đặt, mục tiêu hiệu suất và bề mặt yêu cầu hoàn thiện.