Small integrated ventilation package
Supply, extract, filtration and energy recovery are combined for a single controlled zone or support room.
This compact side-connected unit uses the smallest selected cabinet, approximately 1597 x 1531 x 730 mm, and a documented 720 m3/h selection point. It integrates separate supply and extract fans, filtration and counterflow recovery for a small controlled zone while keeping duct connections on the cabinet sides.
Supply, extract, filtration and energy recovery are combined for a single controlled zone or support room.
Connections on the cabinet sides suit plant rooms where end clearance is limited or ducts run laterally.
The 720 m3/h operating point allows a smaller heater selection than the two higher-capacity compact models.
| Reference Airflow | 720 m3/h |
|---|---|
| Cabinet Dimensions | Approximately 1597 x 1531 x 730 mm |
| Equipment Weight | Approximately 280 kg |
| Heat Exchanger | Counterflow plate type |
| Air Paths | Balanced supply and extract |
| Fan Arrangement | Separate direct-drive fans |
| Heating Option | Electric or water coil sized to duty |
| Filtration | Supply and extract filter stages |
| Connections | Side-connected cabinet |
| การปรับแต่ง | Heating, filtration and duct orientation can be configured for the intended application and operating environment. |
Small controlled production zones, clean support rooms, laboratories and compact mechanical rooms needing balanced heat-recovery ventilation.
Electric or water heating, filter grades, frost protection, fan-speed control, humidity or temperature sensors and connection orientation are selectable.
ส่งมิติของคุณเงื่อนไขการติดตั้งเป้าหมายประสิทธิภาพและผิวที่ต้องการ