Tiếng Anh
Tiếng Đức, tiếng Đức
Tiếng Ả Rập, tiếng Ả Rập
Tiếng Pháp, tiếng Pháp
Tiếng Indonesia (tiếng Việt)
Tiếng Nhật
Tiếng Hàn / tiếng Hàn
Tiếng Mã Lai
Tiếng Bồ Đào Nha, tiếng Bồ Đào Nha
Tiếng Nga, tiếng Nga
Tiếng Tây Ban Nha, tiếng Tây Ban Nha
Tiếng Thái (tiếng Thái)
Tiếng Thổ Nhĩ Kỳ, tiếng Thổ Nhĩ Kỳ
Tiếng Việt / tiếng ViệtHiện tại
Inherent material resilience
The rubber body provides a resilient walking surface without a separate acoustic cushion, making the floor build simpler where firm trolley support is also required.
STJH-CLEANROOM-RUBBER-SHEET-FLOORING-HR20
Cleanroom Rubber Sheet Flooring 2 mm Homogeneous
A solid vulcanized rubber sheet offering a firm resilient surface for regularly used controlled-area routes.
- Solid vulcanized rubber body
- 2 mm sheet without foam backing
- 1.22 m reference roll width
About This Product
The HR20 construction uses dense homogeneous rubber in a 2 mm sheet without a foam cushion. Its resilience comes from the rubber body itself, while the compact section keeps the floor firm under circulation traffic. A 1.22 m roll width supports orderly installation through laboratories and pharmaceutical corridors. The material is selected for its rubber construction rather than a decorative vinyl wear film.
Các tính năng chính
Dense wearing face
The compact surface supports routine cleaning of laboratory dust and everyday traffic deposits. Suitable cleaning equipment should lift contamination without leaving sticky residues.
Manageable installation widths
The roll format allows the installer to plan continuous runs around corridor corners and doorways while keeping individual sheet handling practical in constrained rooms.
Thông số kỹ thuật
| Material | Vulcanized homogeneous rubber |
|---|---|
| Nominal Thickness | 2 mm |
| Reference Roll Width | 1,220 mm |
| Cushion Backing | None |
| Hardness | Approximately 94 Shore A |
| Surface Form | Dense smooth rubber |
| Installation | Full-surface adhesive bonding |
| Wearing Section | Solid rubber through thickness |
| Intended Traffic | Laboratory and controlled-corridor circulation |
| Tùy chỉnh | Có sẵn dựa trên ứng dụng dự định và môi trường hoạt động. |
Applications
Use in laboratory circulation areas and pharmaceutical support corridors where a resilient compact floor is preferred. Match seam sealing to hygiene requirements and the manufacturer's rubber installation method. Chemical contact depends on the reagent and exposure time, so localized spill control remains necessary around dispensing and preparation stations.
Solutions for Your Application
A cushioned finish feels too soft beneath moving carts.
Select the solid non-foam construction and ensure a firm, fully supported bond beneath the sheet.
A floor change introduces a difficult step at an existing doorway.
Account for the 2 mm rubber and adhesive within the threshold detail, with substrate correction completed before laying the finish.
Các tùy chọn có sẵn
Select a standard rubber colour, compatible adhesive and perimeter treatment. Coordinate suitable joint sealing and maintenance pads with the rubber material rather than automatically using a vinyl welding or polishing procedure.
Planning a Cleanroom Rubber Sheet Flooring 2 mm Homogeneous specification?
Gửi cho chúng tôi kích thước của bạn, điều kiện lắp đặt, mục tiêu hiệu suất và bề mặt yêu cầu hoàn thiện.
