Small-room ceiling solution
The compact flat form places ventilation equipment outside the occupied floor area of a laboratory or support room.
The size-10 flat cabinet is intended for small rooms where floor-mounted plant equipment is impractical. Its approximately 155 kg component package combines supply and extract air paths, counterflow recovery, filtration and fan functions above a service zone while maintaining access from below or the selected side.
The compact flat form places ventilation equipment outside the occupied floor area of a laboratory or support room.
A counterflow core transfers energy between supply and extract streams while keeping their air paths separated.
Supply and extract filter classes can be selected around outdoor-air quality and return-air protection needs.
| Nominal Airflow Class | Approximately 400 m3/h |
|---|---|
| Physical Size Class | 10 |
| Approximate Component Weight | 155 kg |
| Heat Exchanger | Counterflow plate type |
| Supply Filter | ePM1 60% class |
| Extract Filter | ePM10 60% class |
| Fan Type | Direct-drive EC fans |
| Casing Corrosion Protection | Coated cabinet suitable for indoor service |
| Mounting | Suspended low-profile ceiling arrangement |
| Tùy chỉnh | Heating, controls and connection orientation can be configured for the intended application and operating environment. |
Small laboratories, clean support rooms, preparation rooms and controlled offices where plant equipment must remain above the ceiling zone.
Water or electric heating, filter selection, sensors, fan-speed control, frost protection, duct connection orientation and remote controller are available.
Gửi cho chúng tôi kích thước của bạn, điều kiện lắp đặt, mục tiêu hiệu suất và bề mặt yêu cầu hoàn thiện.